Related Manuals for Hyundai power products HPV20V
Summary of Contents for Hyundai power products HPV20V
- Page 1 CORDLESS DRILL HPV20V ORIGINAL INSTRUCTIONS WARNING: Read thoroughly the instruction manual before use...
-
Page 2: Safety Instructions
1. SAFETY INSTRUCTIONS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 3 reduce dust related hazards. Remain vigilant and do not neglect the safety principles of the tool on the pretext that you are used to using A split second of inattention can cause serious injury. 4) Power tool use and care a) Do not force the power tool.
- Page 4 6) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. b) Never perform maintenance on damaged battery packs. Battery packs should only be serviced by the manufacturer or authorized service providers.
- Page 5 WARNING ! This device produces an electromagnetic field during operation. This field may interfere in certain circumstances with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend that people with medical implants consult with their physician and the medical implant manufacturer before using this device.
- Page 6 2. ABOUT YOUR PRODUCT a. Description 1. Two speed gear 7. Touch ON / OFF 2. Torque adjustment ring for 8. Handle drilling / drilling / 9. Unlocking the battery 3. Adjusting the chuck Battery (deliver without battery 4. Mandarin and charger) 5.
-
Page 7: Operation
value depending on how the tool is used. And Need to identify safety measures to protect the user which are based on an estimate of the exposure under real conditions of use (taking into account all parts of the operating cycle such as the moments when the tool and off and when it is running in addition to the tripping time. - Page 8 The battery will be empty soon, please recharge the battery. Charger indicator Indicator status Explanations and actions Ready for use The charger is connected to the mains and is ready for use; there is no battery pack in the charger. Charging The charger is charging the battery pack in charge mode.
- Page 9 Improper battery installation can damage internal components c.Removing the battery - Make sure the tool is not running - Push and hold the battery release button. Then slide the battery out of the tool d.Installation of a drill - Put the normal / reverse button in the central position - Turn the chuck until the opening is larger than the size of the drill to be used(1) - Insert the bit into the chuck - Tighten the mandarin on the drill...
- Page 10 the screw securely with a Phillips screwdriver - The belt clip can be attached to the other side of the tool, using only the screw provided, to fit right or left handed users - To change the place clip, remove the screw that holds it, then re-attach it on the other side. Be sure to tighten the screw securely Note: the belt is not supplied with the tool g.Starting and stopping the operation...
- Page 11 Apply a little more pressure in sturdy materials like concrete a.Two-speed gear Use slow speed (1) for high power and high torque, and fast speed (2) for rapid drilling or for screwing Do not change gears while the drill is running. Tool could be damaged b.Torque setting This device allows you to adjust the torque or tightening power of your drill, and depending on the application, several levels of training are required.
-
Page 12: Maintenance And Storage
c.Chocking of the part To prevent the bit from turning the part if it gets stuck in the hole, it is recommended to use a vice or other fixing device to immobilize the part during drilling. If the bit gets stuck in the work or if the drill stalls, stop the tool immediately. Remove the bit from the workpiece and determine the reason for the wedge Note: The drill is equipped with an electric brake. - Page 13 ZI, 32 RUE ARISTIDE BERGES – 312070 CUGNAUX – FRANCE Declares that the machinery designated below : CORDLESS DRILL Model : HPV20V Serial number : 20210404281-20210404580 Complies with the provisions of the Directive « machinery » 2006/42/CE and national laws...
-
Page 14: Warranty
7. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 15: Product Failure
8. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 16: Warranty Exclusions
9. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...
Need help?
Do you have a question about the HPV20V and is the answer not in the manual?
Questions and answers