1. Manuals
  2. Brands
  3. Pace Technologies Manuals
  4. Cutter
  5. MEGA-M250S
  6. Instruction manual

Pace Technologies MEGA-M250S Instruction Manual

Abrasive cutter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1-520-882-6598 Fax +1-520-882-6599 email: pace@metallographic.com
Equipment Type:
Model:
Electrical Requirements:
Frequency:
Motor Horsepower:
Manual Revision Date:
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
MEGA-M250S
Abrasive Cutter
10-inch Manual Abrasive Cut-off Machine
MEGA-M250S
208Y/308V-480V Volts (3-phase)
50/60 Hz
3 hp (3-phase) (2.2 KW)
August 16, 2024
I
M
NSTRUCTION
ANUAL
Web: https://www.metallographic.com
This instruction manual is
provided with each piece of
delivered equipment.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MEGA-M250S and is the answer not in the manual?

Questions and answers

Related Manuals for Pace Technologies MEGA-M250S

Summary of Contents for Pace Technologies MEGA-M250S

  • Page 1 MEGA-M250S Abrasive Cutter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲...
  • Page 2 MEGA-M250S Abrasive Cutter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲...
  • Page 3 Terms and Conditions applying to all PACE Technologies Products 1. LIMITED WARRANTY AND DISCLAIMER: PACE Technologies Products are warranted for two years from the purchase date to be free from defects in material and workmanship under correct use, normal operating conditions, and proper application. PACE...
  • Page 4 All Returns are subject to a restocking charge equal to 15% (fifteen percent) of the Invoice, unless the Goods are proved to be non-conformed by PACE Technologies. Please read this instruction manual carefully and follow all installation, operating and safety guidelines.

  • Page 5: Table Of Contents

    MEGA-M250S Abrasive Cutter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲...

  • Page 6: Product Description

    3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1-520-882-6598 Fax +1-520-882-6599 email: pace@metallographic.com Web: https://www.metallographic.com Powerful motor 1.0 Product Description The MEGA-M250S is equipped with a powerful belt driven motor. In addition, the The MEGA-M250S is a manual wheel motor has an inductive brake for a quicker feed abrasive cut-off machine for cutting of halting the blade (approx.
  • Page 7 MEGA-M250S Abrasive Cutter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲...
  • Page 8 MEGA-M250S Abrasive Cutter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲...

  • Page 9: Technical Specifications

    MEGA-M250S Abrasive Cutter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲...
  • Page 10 Measures WxHxD: Approx. 38 x 38 x 38-inch Weight: Approx. 260 lbs 2.2 Shipping When moving crate, lift from bottom. To move MEGA-M250S use support bars provided with the machine. The MEGA-M250S is constructed of sensitive electronic and mechanical components. Do not drop.

  • Page 11: Installation

    3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1-520-882-6598 Fax +1-520-882-6599 email: pace@metallographic.com Web: https://www.metallographic.com 2.3 Installation Install unit carefully! Improper installation voids warranty. Main The MEGA-M250S should be placed on a flat stable surface. Power Rinse Supply Connect coolant tank supply, drain and electrical connections.
  • Page 12 Note: Inspect the operating voltage on the name plate. Electrical connection for external coolant supply: Power for recirculation system comes from the MEGA-M250S, Recommended Coolant: To minimize corrosion apply a coolant with a anti-corrosion additive or an oil emulsion coolant is recommended. Note: Recommended that the coolant be changed every 50 cuts or once a week, whichever occurs first.

  • Page 13: Safety Guidelines

    Careful attention to this instruction manual and the recommended safety guidelines is essential for the safe operation of the MEGA-M250S. Proper operator training is mandatory for the safe operation of the MEGA-M250S. Any unauthorized mechanical and electrical change, as well as improper operation, voids all warranty claims.
  • Page 14 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲ NSTRUCTION ANUAL 3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1-520-882-6598 Fax +1-520-882-6599 email: pace@metallographic.com Web: https://www.metallographic.com Recirculation tank The MEGA-M250S is equipped with a coarse filter to remove large particulate Electrical Pressure connection and broken blades...

  • Page 15: Safety Tests

    3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1-520-882-6598 Fax +1-520-882-6599 email: pace@metallographic.com Web: https://www.metallographic.com 3.4 Safety Tests Examine and verify that the MEGA-M250S safety devices and operating performance are in good working condition prior to use. The following safety checks are...

  • Page 16: Start-Up And Operation

    ANUAL 3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1-520-882-6598 Fax +1-520-882-6599 email: pace@metallographic.com Web: https://www.metallographic.com 4.0 Start-up and Operation 4.1 General The MEGA-M250S is a manual wheel feed variable speed cutter. 4.2 Control Panel Cutting motor Emergency Light...
  • Page 17 MEGA-M250S Abrasive Cutter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲...
  • Page 18 MEGA-M250S Abrasive Cutter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲...
  • Page 19 MEGA-M250S Abrasive Cutter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲...

  • Page 20: Maintenance

    5.0 Maintenance 5.1 Introduction The recommended maintenance for the MEGA-M250S includes the following: Important: Clean the table feed shaft after using the cutter to keep the abrasive from building up in the bushing. If the table feed begins to become more difficult use WD-40 to clean the feed shaft until the feed improves.

  • Page 21: Trouble Shooting

    MEGA-M250S Abrasive Cutter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲...

  • Page 22: Troubleshooting Error Codes

    MEGA-M250S Abrasive Cutter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲...
  • Page 23 MEGA-M250S Abrasive Cutter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲...
  • Page 24 MEGA-M250S Abrasive Cutter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲...
  • Page 25 MEGA-M250S Abrasive Cutter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲...
  • Page 26 MEGA-M250S Abrasive Cutter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲...
  • Page 27 MEGA-M250S Abrasive Cutter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲...
  • Page 28 MEGA-M250S Abrasive Cutter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲...
  • Page 29 MEGA-M250S Abrasive Cutter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲...

Table of Contents