Page 2
Terms and Conditions applying to all PACE Technologies Products 1. LIMITED WARRANTY AND DISCLAIMER: PACE Technologies Products are warranted for two years from the purchase date to be free from defects in material and workmanship under correct use, normal operating conditions, and proper application.
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1-520-882-6598 Fax +1-520-882-6599 email: pace@metallographic.com Web: https://www.metallographic.com Powerful motor 1.0 Product Description The MEGA-T350A is equipped with a powerful belt driven servo motor. In addition, the motor The MEGA-T350A is an automatic / manual has an inductive brake for faster stopping of the table feed or manual wheel feed blade (approx.
Page 10
MEGA-T350A hood closed dimensions MEGA-T350A hood open dimensions Note: Installation of the MEGA-T350A should be on a flat sturdy surface, with easy access to electrical connections. Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
Page 11
Measures WxHxD: Approx. 33.5 x 37.5 x 60-inch Weight: Approximately 650 lbs. 2.2 Shipping When moving crate, lift from bottom. To move MEGA-T350A use support bars provided with the machine. The MEGA-T350A is constructed of sensitive electronic and mechanical components. Do not drop.
Page 12
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1-520-882-6598 Fax +1-520-882-6599 email: pace@metallographic.com Web: https://www.metallographic.com 2.3 Installation Install unit carefully! Improper installation voids warranty. Main The MEGA-T350A should be placed on a flat stable surface. Power Connect coolant tank Rinse supply, drain and Supply electrical connections.
Careful attention to this instruction manual and the recommended safety guidelines is essential for the safe operation of the MEGA-T350A. Proper operator training is required for the safe operation of the MEGA-T350A. Any unauthorized mechanical and electrical change, as well as improper operation, voids all warranty claims.
Page 15
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲ 3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1-520-882-6598 Fax +1-520-882-6599 email: pace@metallographic.com Web: https://www.metallographic.com Recirculation tank The MEGA-T350A is equipped with a Electrical coarse filter to remove large particulate Pressure...
Page 16
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1-520-882-6598 Fax +1-520-882-6599 email: pace@metallographic.com Web: https://www.metallographic.com 3.4 Safety Tests Examine and verify that the MEGA-T350A safety devices and operating performance are in good working condition prior to use. The following safety checks are...
5.0 Maintenance 5.1 Introduction The recommended maintenance for the MEGA-T350A includes the following: 1. Use an anti-corrosion cutting fluid such as the MAXCUT 2 cutting fluid. It is recommended that the cutting fluid be changed every 50 cuts or weekly for maximum effectiveness.