Table of Contents
Advertisement
TO ADJUST THE SHELVES
o
o
o
Lift front edge up.
Pull shelf out
Replace the shelf by inserting the hooks at rear of the shelf
into the wall bracket. Lower the shelf into the desired slots
and lock into position.
CRISPERS WiTH ADJUSTABLE
DiViDERS
The crispers, located at the bottom of the freezer shelf, provide
separate
storage space for items that are difficult to store on
freezer slelves.
MiD LEVEL LiGHTiNG
The mid level lighting is located at the back of the crispers. The
lights come on automatically when the door is opened.To replace
the light bulb, turn the temperature
control to OFF and unplug
the electrical cord. Remove the lens from the lamp housing by
unsnapping
it from the lamp housing
using your fingers or a
screwdriver. Be careful not to break the locking tabs on the lamp
housing. Replace the old bulb with a bulb of the same type and
wattage. To replace the lens, snap one side of the lens opening
to the tab on the lamp housing. Then carefully attach the other
side.
To Remove
Light Lens
Press Tabs
in Direction
Shown.
Mid Level Lighting
o/ \+
AiR FILTER
The air filter is located on the back of the control box. In general,
you should change the air filter every six months to ensure optimal
filtering of freezer odors. You may want to adjust this time period
depending on the types and amounts of food you typically store
in your freezer.
TO REPLACE THE AiR FILTER:
•
Push the plastic bubble tab at the back of the control box
housing. This releases the hinged bottom half to drop open.
•
Remove the old filter and discard it.
•
Unpackage the new filter and place it inside the hinged bottom
half of the qousing.
•
Push the qinged bottom half upward until the tab snaps into
closed position.
DOOR MOUNTED TEMPERATURE
GAUGE
The door mounted temperature
gauge
displays
the cabinet
internal temperature.
8
Advertisement
Table of Contents
