Advertisement
Quick Links
1
C-Stand Holder for Proaim Victor & Atlas Camera Production
Carts
(CT-CSHD-01)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.
Advertisement
Related Manuals for PROAIM CT-CSHD-01
Summary of Contents for PROAIM CT-CSHD-01
- Page 1 C-Stand Holder for Proaim Victor & Atlas Camera Production Carts (CT-CSHD-01) All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright...
-
Page 2: What's In The Box
What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below. C-Stand Holders 2 X Allen Bolts 4 X Knobs 2 X Washers (Size: 3/8”x 3/4”) 1 X L-Type Allen Key (Size: 5/16”) - Page 3 Align the threaded holes with the crossbar, insert the knob, and tighten it securely. • Repeat the process for the remaining knobs. Note: This is compatible with our Proaim Atlas and Victor V1 Cart series. • The top part of the C-stand holder is securely attached to the crossbar.
- Page 4 Detach the C-Stand Holder Note: To use cheese bar (Not Included), the C-stand holder must be removed. • Unscrew and remove all knobs securing the holder. • Gently detach the C-stand holder from the crossbars. Detach Screw and Knob – Cheese Bar •...
- Page 5 • Slide the base clamps onto the long top shelf crossbar. Cheese Bar Assembly • Reinsert the screw into the cheese bar using an allen key . • Repeat on the opposite side. • Attach the knob to the cheese bar and tighten securely.
- Page 6 • Tighten the knobs on both ends to secure it firmly. • Position the C-Stand Holder onto the cheese bar. • Place the washers onto the mounting holes of the holder. • Insert the bolt through the washer into the cheese bar.
- Page 7 • Insert the knob into the cheese bar and tighten securely. • Repeat for all remaining knobs. C-Stand Mounting • Place the C-Stands onto the mounted holder. NOTE: It easily accommodates up to four C-stands, from 20" small to 40" full-size stands.
- Page 8 YOUR PROAIM C-STAND HOLDER FOR PROAIM VICTOR AND ATLAS CAMERA PRODUCTION CART ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer a one-year warranty on our products from the date of purchase. During this period, we will repair the product free of charge for labor or parts.
Need help?
Do you have a question about the CT-CSHD-01 and is the answer not in the manual?
Questions and answers