Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Beurer BM 51 easyClip
Summary of Contents for Beurer BM 51 easyClip
- Page 1 BM 51 easyClip EN Blood pressure monitor Instructions for use...
-
Page 2: Table Of Contents
Thank you for choosing a product from our range. Our name stands for high-quality, thoroughly tested products for applications in the areas of heat, weight, blood pressure, body temperature, pulse, gentle therapy, massage, beauty, baby and air. With kind regards, Your Beurer team Table of contents 1. Included in delivery ............... 3 8. -
Page 3: Included In Delivery
1. Included in delivery Isolation of applied parts Check that the exterior of the cardboard delivery packaging Type BF is intact and make sure that all contents are present. Before Galvanically isolated applied part (F stands use, ensure that there is no visible damage to the device or for “floating”);... -
Page 4: Intended Use
form the user via a symbol in the display. The device saves the Operating Permissible operating temperature and recorded measurements and can also output average values of humidity previous measurements. The recorded data can provide healthcare service providers Serial number with support during the diagnosis and treatment of blood Device protected against foreign objects pressure problems, and therefore plays a part in the long-term... -
Page 5: Warnings And Safety Notes
• Do not place the cuff over wounds as this may cause further • Do not use the device outside of the specified storage and injury. operating conditions. This could lead to incorrect measure- • Make sure that the cuff is not placed on an arm in which the ments. -
Page 6: Notes On Electromagnetic Compatibility
• Ensure the device is at room temperature before measuring. • If the device is not to be used for a relatively long pe- If the measuring device has been stored close to the maxi- riod, take the batteries out of the battery compartment. mum or minimum storage and transport temperatures and is •... -
Page 7: Device Description
5. Device description Information on the display: 1. Date/time 2. Systolic pressure 3. Diastolic pressure 4. Calculated pulse rate 5. Pulse symbol 6. Battery replacement symbol 7. Number of memory spaces / memory display for average value ( ), morning ( evening ( 8. -
Page 8: Initial Use
6. Initial use There are two different ways to access the menu from which you can adjust the settings: Inserting the batteries • Before initial use and after each time you replace the battery: • Remove the battery When inserting batteries into the device, you will be taken to compartment lid on the rear the relevant menu automatically. -
Page 9: Usage
• Furthermore, the mains part must only be connected to The day flashes on the display. the mains voltage that is specified on the type plate. • Use the function buttons to select the • Insert the mains part into the connection provided for relevant day and confirm using the SET this purpose on the right-hand side of the blood pressure setting button. -
Page 10: Adopting The Correct Posture
2. The cuff must be placed Ensure that your arm is not pressing on the line. on the upper arm so Blood pressure may vary between the right and left arm, that the bottom edge is which may mean that the measured blood pressure values are positioned 2-3 cm above different. -
Page 11: Selecting Memory
Selecting memory The cuff automatically inflates. The measurement itself is Press the SET setting button. Select the relevant user memory taken during the inflation phase. ) by pressing the function buttons. As soon as a pulse is found, the pulse symbol will be You have 2 memories, each with 100 memory spaces, to displayed. -
Page 12: Evaluating Results
Evaluating results The bar chart on the display and the scale on the device show which category the recorded blood pressure values fall into. Cardiac arrhythmia: If the values of systole and diastole fall into two different This device can identify potential disruption of the heart rhythm categories (e.g. -
Page 13: Saving, Displaying And Deleting Measured Values
Saving, displaying and deleting measured values When the M memory button is pressed again, the last individual measured The results of every successful measurement are stored values in each case are displayed together with the date and time. If there are more than with the date and time (for example 100 measurements, the oldest measurements are lost. -
Page 14: Cleaning And Maintenance
8. Cleaning and maintenance 10. What if there are problems? • Clean the device and cuff carefully using only a slightly Error Possible cause Solution damp cloth. message • Do not use any cleaning agents or solvents. Unable to record Please wait one minute •... -
Page 15: Disposal
Disposing of the batteries Error Possible cause Solution message • Empty, completely flat batteries must be disposed of through System error Please contact customer specially designated collection boxes, recycling points or service. electronics retailers. You are legally required to dispose of the batteries. - Page 16 • This device complies with the European standard EN 60601-1-2 Memory 2 x 100 memory spaces (in compliance with CISPR 11, IEC 61000-4-2, IEC 61000-4-3, Dimensions L 138 mm x W 103 mm x H 46 mm and IEC 61000-4-8) and is subject to special precautionary Weight Approximately 570 g measures with regard to electromagnetic compatibility.
-
Page 17: Mains Part
Input 100 – 240 V, 50 – 60 Hz, 0.5 A max Output 6 V DC, 600 mA, in conjunction with Beurer blood pressure monitors only Manufacturer Shenzhen Iongxc power supply co., ltd. Protection The device is double protected and... - Page 20 Beurer GmbH • Söflinger Straße 218 • 89077 Ulm, Germany www.beurer.com • www.beurer-healthguide.com...
Need help?
Do you have a question about the BM 51 easyClip and is the answer not in the manual?
Questions and answers