Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for IFM O3M1 Series
Summary of Contents for IFM O3M1 Series
- Page 1 Operating instructions Mobile 3D (smart) sensor / camera O3M1xx O3M2xx...
-
Page 2: Table Of Contents
O3M1xx O3M2xx Mobile 3D (smart) sensor / camera Contents Preliminary note ............. Symbols used . -
Page 3: Preliminary Note
Device of protection class III. Only for operation in PELV circuits (Ò chapter Electrical connection). 1.4 Legal and copyright information © All rights reserved by ifm electronic gmbh. No part of these instructions may be reproduced and used without the consent of ifm electronic gmbh. - Page 4 O3M1xx O3M2xx Mobile 3D (smart) sensor / camera All product names, pictures, companies or other brands used on our pages are the property of the respective rights owners.
-
Page 5: Safety Instructions
Mobile 3D (smart) sensor / camera O3M1xx O3M2xx 2 Safety instructions • The unit described is a subcomponent for integration into a system. – The system architect is responsible for the safety of the system. – The system architect undertakes to perform a risk assessment and to create documentation in accordance with legal and normative requirements to be provided to the operator and user of the system. -
Page 6: Functions And Features
O3M1xx O3M2xx Mobile 3D (smart) sensor / camera 3 Functions and features The mobile 3D smart sensor / camera is a photoelectric sensor (hereinafter referred to as “device”). The device measures the distance to the nearest surface point by point. The device is operated as a system together with an illumination unit. The illumination unit illuminates the scene and the device processes the light reflected by the surface. -
Page 7: Installation
Mobile 3D (smart) sensor / camera O3M1xx O3M2xx 4 Installation The device is operated as a system together with the illumination unit. During installation note the following: u Operate the device and the illumination unit in combination. Fig. 1: Combination of the device and the illumination unit u Install the device and the illumination unit between 0 and 2.80 m apart. -
Page 8: Electrical Connection
O3M1xx O3M2xx Mobile 3D (smart) sensor / camera 5 Electrical connection The device must be connected by a qualified electrician. u Disconnect power before connecting the device. Protection class III (PC III) device (IEC 61010-2-201 chap. 6.5.2.101.4). The electrical supply must •... -
Page 9: Wiring Example
Mobile 3D (smart) sensor / camera O3M1xx O3M2xx ATTENTION The unit can be damaged by insufficiently tightened M12 connectors. w The IP rating indicated in the data sheet is only guaranteed if the M12 connectors are firmly screwed. u Firmly screw the M12 connectors to the unit. u Cover the unused sockets with the pre-mounted protective caps. -
Page 10: Wiring, Rear
O3M1xx O3M2xx Mobile 3D (smart) sensor / camera 5.2 Wiring, rear Fig. 4: Connections on the rear 1 Power supply and CAN bus 2 Ethernet 3 MCI (Modulation and Communication Interface) (1) Power supply and CAN bus M12 connector, A-coded, 5 poles 1: Shield 2: 9...32 V 3: GND... -
Page 11: Ethernet
1: Shield 3: GND 4: FBAS (video) Only use the following ifm cables for the analogue video output: w E3M151 (5 m, connection cable, angled connector) E3M152 (11 m, connection cable, angled connector) E3M153 (16 m, connection cable, angled connector) -
Page 12: Analogue Video Output (Pal)
5.3.1 Analogue video output (PAL) The O3M2xx devices have an additional analogue video output (PAL). The 2D image of the analogue video output can be displayed in the ifm Vision Assistant software using a video converter. The video converter must support the following functions: - PAL television standard, - Microsoft DirectX. -
Page 13: Installation
Download the Windows drivers for CANFox via the download area of the article EC2112: documentation.ifm.com The operation of the ifm Vision Assistant software is described in the software manual. u Download the software manual via the download area of the device:... -
Page 14: Set-Up
Activate the power supply. During the first set-up the device connects with the illumination unit. Connection may take up to 60 s. Afterwards the device can be configured via the ifm Vision Assistant software. (Ò Installation / 13) Fehlermeldungen beim Parametrieren des 3D-Sensors w Der 3D-Sensor O3M1xx/2xx muss für die Parametrierung mit der Beleuchtungseinheit... -
Page 15: Changing The Operation Principle
Installing the firmware: u Download the firmware via the download area of the device: documentation.ifm.com u Install the firmware via the ifm Vision Assistant software. w The installation of the firmware is described in the software manual of the device: documentation.ifm.com... -
Page 16: Approvals/Standards
Mobile 3D (smart) sensor / camera 8 Approvals/standards For approvals and standards, the following information is available: • Test standards and regulations: documentation.ifm.com • EU declaration of conformity and approvals: documentation.ifm.com • Notes relevant for approval: Package insert of the device and... -
Page 17: Maintenance, Repair And Disposal
Mobile 3D (smart) sensor / camera O3M1xx O3M2xx 9 Maintenance, repair and disposal If used correctly, the unit is maintenance-free. Soiling reduces the contrast and the recognition performance. u Keep the front pane free from soiling. u Use glass cleaner or isopropanol as a cleaning agent. Only the manufacturer is allowed to repair the unit.
Need help?
Do you have a question about the O3M1 Series and is the answer not in the manual?
Questions and answers