Page 1
Assembly Instructions BUNDLE - SEGOVIA METAL 3 PC OUTDOOR FURNITURE SET W/ CHAIRS SKU 958 1x METAL SEGOVIA SOFA 2x METAL SEGOVIA CHAIR See following pages for individual component assembly instructions...
Page 3
Seat Frame Back Frame Right Leg Left Leg Center Leg Back Cushion Seat Cushion Long Allen Bolt (M6x55)mm Short Allen Bolt (M6x40)mm Spring Washer M6 Flat Washer (M6x1)mm Shorter Allen Bolt (M8x20)mm Spring Washer M8 Flat Washer (M8x1.2)mm Page 2...
Page 5
Step 1 Shorter Allen Bolt (M8x20)mm x4 Spring Washer M8 x4 Flat Washer (M8x1.2)mm x4 Allen Key IMPORTANT: Please make note of the different hardware sizes and ensure you are using the correct size hardware (bolts, screws and washers) for each step. Using a second person to assist you, Place Seat Frame (A) upside down onto a padded, non-marring surface.
Page 6
Step 3 Long Allen Bolt (M6x55)mm x2 IMPORTANT: Please make note of the different hardware Short Allen Bolt (M6x40)mm x8 sizes and ensure you are using the correct Spring Washer M6 x10 size hardware (bolts, screws and washers) Flat Washer (M6x1) x10 for each step.
Page 10
Step 1 IMPORTANT: Short Allen Bolt (M6x40)mm x3 Please make note of the different hardware Spring Washer M6 x3 sizes and ensure you are using the correct size hardware (bolts, screws and washers) Flat Washer (M6x1)mm x3 for each step. Allen Key x2 Using a second person to assist you, position the Seat Frame (A) with the Back Frame (B) as shown.
Page 11
Step 3 Levelers are located on the bottom of each leg and may be used for additional adjustment if needed for uneven surfaces. Using a second person to assit you, turn the assembly upright. Place Seat Cushions (G) and Back Cushions (F) into position as shown above.
Need help?
Do you have a question about the SEGOVIA 958 and is the answer not in the manual?
Questions and answers