Related Manuals for ITC TS-340VL
Summary of Contents for ITC TS-340VL
- Page 1 V-type Phantom Powered 48V Conference Microphone User Manual TS-340VL TS-340VD Before using this product, please read this manual carefully...
- Page 2 Preface Thank you for choosing the V-type phantom powered 48V conference microphone. Please read this manual carefully before use. V-type base is cast in zinc alloy. The inner cavity is equipped with a 48V phantom power supply to 4.1-4.1V DC output circuit. Any one of the transduction methods provided by the manufacturer can be arbitrarily selected as an electret condenser microphone, such as square tube microphones, sound collecting interference tubes, goosenecks, etc.
-
Page 3: Product Description
The microphone features solid structure, stable performance, simple operation, good pickup effect, and perfect presentation of the sound quality. It can be used in high-end conference rooms, etc. II. Effect diagram TS-340VL gooseneck microphone rendering: TS-340VD microphone with square pole rendering: - 2 -... -
Page 4: Function Introduction
III. Function introduction ① 48V phantom power connection cable port (6 meters shielded cable, one big three-core Canon head to the mixer). ② 5-core aviation plug. ③ LED power indicator. ④ Power switch. ⑤ V-type zinc alloy base. - 3 -... - Page 5 IV. Dimension diagram (base) - 4 -...
-
Page 6: Specification
V. Specification Model TS-340VL 48V phantom power supply, only connected to Input power the mixer (6M shielded cable, XLR interface) 48V phantom power supply, only connected to Input power the mixer Output voltage DC 4.1-4.2V Mic type Electret condenser microphone... - Page 7 Model TS-340VD 48V phantom power supply, only connected to Input power the mixer (6m shielded cable, XLR interface ) Output voltage DC 4.1-4.2V Mic type Electret condenser microphone Directivity Cardioid polar pattern Sensitivity -36±1.5dB (0dB=1V/Pa, at 1KHz) Output impedance 2.2kΩ±30%@1khz Test conditions: 1.5V, 2.2kΩ Frequency response 80Hz-16kHz Equivalent noise level...
-
Page 8: Maintenance And Precautions
VI. Maintenance and precautions Fault phenomenon Fault cause Power LED light has no indication Check whether the line is broken The microphone used has no Check whether the 5-pin aviation signal display plug is in good contact Audio signal distortion Try another microphone Audio signal has too much Replace...
Need help?
Do you have a question about the TS-340VL and is the answer not in the manual?
Questions and answers