Subscribe to Our Youtube Channel
Related Manuals for Koehler K60002
Summary of Contents for Koehler K60002
- Page 1 K60002, K60092 Heated Oil Test Centrifuge service | innovation | technology REV K-A...
- Page 2 K60002, K60092 Heated Oil Test Centrifuge Operation and Instruction Manual - ii -...
- Page 3 ERTIFICATE OF ONFORMANCE Automatic Heated Oil Test Centrifuge K60002, K60092 This certificate verifies that part numbers K60002, K60092, Automatic Heated Oil Test Centrifuge, was manufactured in conformance with the applicable standards set forth in this certification. Specifications: ASTM D91 ASTM D96...
- Page 4 K60002, K60092 Heated Oil Test Centrifuge Operation and Instruction Manual - iv -...
- Page 5 Responsibility for Registration and Annual Reporting: Koehler will not sell directly to end users in the EU and so has no responsibility to register within each EU state and to make annual reports. Koehler declares that this responsibility is born by the importer who is the first level of the distribution chain and is subject to producer responsibility.
- Page 6 Recycling is free of charge. Shipping is the responsibility of the end users. Whether shipping to a distributor or to Koehler directly, safe, properly declared, and labeled packaging and shipping expenses are the sole responsibility of the end user.
-
Page 7: Table Of Contents
K60002, K60092 Heated Oil Test Centrifuge Operation and Instruction Manual Table of Contents 1. Introduction 1.1. Koehler’s Commitment to Our Customers 1.2. Recommended Resources and Publications 1.3. Instrument Specifications 2. Safety Information and Warnings 3. Getting Started 3.1. Unpacking 3.2. Setup 3.3. -
Page 8: Introduction
Providing quality testing instrumentation and technical support services for research and testing laboratories has been our specialty for almost 100 years. At Koehler, the primary focus of our business is providing you with the full support of your laboratory testing needs. Our products are backed by our staff of technically knowledgeable, trained specialists who are experienced in both petroleum products testing and instrument service to better understand your requirements and provide you with the best solutions. -
Page 9: Instrument Specifications
K60002, K60092 Heated Oil Test Centrifuge Operation and Instruction Manual Fax: 41 22 733 34 30 4. Deutsche International Norm (DIN) http://www.iso.org http://www.din.de ISO Publication: DIN Publication: • ISO 3734: Determination of Water and Sediment • 51793: Testing Liquid Fuels;... -
Page 10: Safety Information And Warnings
K60002, K60092 Heated Oil Test Centrifuge Operation and Instruction Manual Safety Information and Warnings Safety Considerations. The use of this equipment may involve hazardous materials and operations. This manual does not purport to address all of the safety problems associated with the use of this equipment. It is the responsibility of any user of this equipment to investigate, research, and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. -
Page 11: Setup
K60002, K60092 Heated Oil Test Centrifuge Operation and Instruction Manual Carefully unpack and place the instrument and accessories in a secure location. Inspect the unit for damage. If any damage is found, keep all packing materials and immediately report the damage to the carrier. We will assist you with your claim, if requested. -
Page 12: Accessories For Running Tests
K60002, K60092 Heated Oil Test Centrifuge Operation and Instruction Manual 11. After the unit is mounted to the table, plug in the line cord and turn the unit “ON”. Press the “STOP” button on the touch screen to unlock the door. -
Page 13: Descriptions
K60002, K60092 Heated Oil Test Centrifuge Operation and Instruction Manual 4. Descriptions 4.1. Instrument Description Figure 1. Instrument Descriptions Power ON. Pushing this button turns on the power to the entire unit. Power OFF. Pushing this button turns off the power to the entire unit. This button can also be used as the Emergency Shut Down Point. - Page 14 IMPORTANT NOTE: The digital temperature controller has been pre-programmed specifically for this instrument at the Koehler factory. Please do NOT attempt to re-program the controller as this may cause undesired operation and will void the product warranty. If assistance is required, please do not hesitate to contact the Koehler technical service department.
-
Page 15: Operation
K60002, K60092 Heated Oil Test Centrifuge Operation and Instruction Manual 5. Operation 1. Push the green button to power ON the centrifuge. The splash screen will display on the touch screen Figure 3. Splash Screen The yellow PWR LED will illuminate to indicate power is on. The red COM LED will illuminate to indicate successfull communication between the screen and the centrifuge’s internal PLC. - Page 16 K60002, K60092 Heated Oil Test Centrifuge Operation and Instruction Manual The second screen displays the Finger Tube on the left and the Short Tube on the right. Figure 6. Select Model Screen (Finger Tube and Short Tube) Select the image of the tube types to be used for testing.
-
Page 17: Running Tests
K60002, K60092 Heated Oil Test Centrifuge Operation and Instruction Manual Effective RPMs vary with tube type and are automatically calculated by the centrifuge according to the following equation: *Tip to tip of glass tubes Effective RPMS will display on the bottom of the RCF screen. Click OK to save any changes made in settings and return to the Main screen. -
Page 18: Maintenance
K60002, K60092 Heated Oil Test Centrifuge Operation and Instruction Manual At the end of the set time, the centrifuge will break. When the carousel completely stops spinning, the unit will beep for approximately 20 seconds to signal the end of test. (To cease the beeping signal, press the red stop button on the Main screen) The lid will unlock and samples can be removed. -
Page 19: Replacement Parts
K60002, K60092 Heated Oil Test Centrifuge Operation and Instruction Manual 6.2. Replacement Parts Carousel Assemblies Part Number Replacement Part Part Number Replacement Part K60002-LT-1 LONG TUBE Carousel Assembly 351-000-007 Proximity Magnet (Includes Carousel, Tube Holders, & Cushions 050-001-047 Proximity Magnet Switch... -
Page 20: Wiring Diagrams
K60002, K60092 Heated Oil Test Centrifuge Operation and Instruction Manual 7. Wiring Diagrams 7.1. Cabinet Wiring - 11 -... -
Page 21: Pcb Wiring
K60002, K60092 Heated Oil Test Centrifuge Operation and Instruction Manual 7.2. PCB Wiring - 12 -... -
Page 22: Temperature Controller Configuration
K60002, K60092 Heated Oil Test Centrifuge Operation and Instruction Manual 7.3. Temperature Controller Configuration - 13 -... -
Page 23: Troubleshooting
We, at Koehler, would like to thank you for your equipment purchase, which is protected by the following warranty. If within one (1) year from the date of receipt, but no longer than fifteen (15) months from the date of shipment, Koehler equipment fails to perform properly because of defects in materials or workmanship, Koehler Instrument Company, Inc. -
Page 24: Returned Goods Policy
12. Returned Goods Policy To return products for credit or replacement, please contact Koehler Customer Service with your purchase order number, our packing list/invoice number, the item(s) to be returned and the reason for the return. You will be issued a Returned Authorization (RA) number, which must be prominently displayed on the shipping container when you return the material to our plant. - Page 25 K60002, K60092 Heated Oil Test Centrifuge Operation and Instruction Manual Notes - 16 -...
- Page 26 K60002, K60092 Heated Oil Test Centrifuge Operation and Instruction Manual Notes - 17 -...
Need help?
Do you have a question about the K60002 and is the answer not in the manual?
Questions and answers