Table of Contents
Advertisement
- Backup: Click Get the backup file to save the current
configuration of the camera.
- Restore: Click Browse to locate the backup file and then
click Restore.
z Update Firmware: You can upgrade the firmware for your
camera once you obtained a latest version of firmware.
- Current Firmware Version: This item displays the
current firmware version.
- Select the firmware: Click Browse to locate the backup
file and then click Update.
NOTE
Make sure to keep the camera connected to the power source
during the process of upgrading firmware. Otherwise, the
camera might be damaged because of failure of upgrading
firmware.
When this happens, the system will enable the Rescue mode (as
shown below) after the camera reboots, so that you can upgrade
the firmware again.
IPEyeAnywhere 241 / 341
TM
57
Advertisement
Table of Contents
Need help?
Do you have a question about the IP EYE ANYWHERE 241 - ADVANCED and is the answer not in the manual?