Marmitek IP EYE ANYWHERE 241 - ADVANCED Installation Manual page 38

Hide thumbs Also See for IP EYE ANYWHERE 241 - ADVANCED:

Table of Contents

4.4.4 Network >> Wireless Setting

The IPEyeAnywhere 241 / 341 supports WLAN while you use the

wireless network. Select the Enable option to enable this feature.

Wireless

- Network ID (SSID): Keep the default setting of this option

to connect the camera to any access point under the

infrastructure network mode. To connect the camera to a

specified access point, set a SSID for the camera to

correspond with the access point's ESS-ID. To connect

the camera to an Ad-Hoc wireless workgroup, set the

same wireless channel and SSID to match with the

computer's configuration.

IPEyeAnywhere 241 / 341

Table of Contents

Ip eye anywhere 341 Ip eye anywhere