Etect - Marmitek IP EYE ANYWHERE 241 - ADVANCED Installation Manual

Hide thumbs Also See for IP EYE ANYWHERE 241 - ADVANCED:

Table of Contents

4.7 Motion Detect

The Motion Detect menu contains the command and option that

allow you to enable and set up the motion detection feature of the

camera. The camera provides three detecting areas.

To enable the detecting area, select Window 1/2/3 from the pull-

down list, and then select Enable. When the detecting area is

enabled, you can use the mouse to move the detecting area and

change the area coverage.

z Name: Assign a name to the detecting area.

z Threshold: Move the slide bar to adjust the level for

detecting motion to record video.

NOTE

Sliding the Threshold bar to the right will decrease the

sensitivity of motion detection; sliding the Threshold bar to the

left will increase the sensitivity of motion detection.

MARMITEK

Table of Contents

Need help?

Do you have a question about the IP EYE ANYWHERE 241 - ADVANCED and is the answer not in the manual?

Ip eye anywhere 341 Ip eye anywhere