Additionally, the dash camera with a display is intended to supplement, not replace, your standard rearview mirror or other vehicle mirrors. VSYSTO is not responsible for any losses caused by accidents and does not provide support regarding the outcome of such accidents.
Packing List The items may vary for different buying options. Main unit Cam 1 & extension cable Cam 2 & extension cable Main unit mount Wired Controller ACC power cable USB test cable Main unit structure The product design may change without prior notice. Mounting hole Cam 1 Wired controller...
Getting Started Inser ting a Memor y Card Insert the memory card into the card slot until it clicks. To remove the memory card, push to eject the memory card out of the slot. NOTE: • Make sure to insert the memory card in the right direction. •...
Page 5
Video Playback Playback on the mobile device • Wi-Fi: Connect to the dash cam through Wi-Fi APP (Android & iOS), you can easily play back videos on your mobile device. • OTG: Plug the micro SD card into your mobile device with an OTG card reader (need your mobile device support OTG).
Page 6
Tap to switch to the front/rear camera Wi-Fi Connection Troubleshooting My WiFi App Doesn't Connect 1) Make sure the camera is powered on and the correct wifi was connected. 2) Make sure the wifi app has been upgraded to the latest version. 3) For a smooth Wi-Fi connection between your smartphone and VSYS camera, make sure the distance between both is within a range of 3~5 meters (10~16 ft).
Why is there no sound during video playback on the computer? Sometimes, the media players on Windows and Apple devices lack the required codecs to play specific video files, resulting in missing audio. To fix this, you can try installing a codec pack like K-Lite Codec Pack for Windows or Perian for Mac.
Page 8
Camera Installation The concave and convex bayonet of the joint shall be matched correctly Screws Bracket Double-sided foam tape Power Module Installation Double-sided foam tape Positive double-sided foam tape Negative A 12V wire that is controlled by the key Connect the red wire to the positive terminal of the motorcycle's battery, the black wire to the negative terminal, and the yellow wire to a 12V port that's controlled by the KEY ignition (ACC wire).
Need help?
Do you have a question about the D6WL and is the answer not in the manual?
Questions and answers