Before using the product This product records videos while the motorcycle is operating. Use this product only for reference when investigating incidents or road accidents. This product is not guaranteed to record ALL events. The device may not properly record accidents with small impacts that are too minor to activate the impact sensor or accidents with massive impacts that cause the motorcycle’s battery voltage to deviate.
Packing List The items may vary for different buying options. Power cord Front camera & extension cable Main unit Wired Controller Rear camera & extension cable Handlebar mount USB test cable GPS tracker Cable ties Main unit structure The product design may change without prior notice. Mounting holes Card slot Speaker...
Getting Started Insert a Memory Card: Insert a memory cardinto the card slot until it clicks. To remove the memory card, push to eject the memory card out of the slot. • Make sure to insert the memory card in the right direction. •...
Page 5
Select the setting options and press the [OK] button to enter Playback Mode. “F/” indicates front cam video playback “R/” indicates rear cam video playback F/REC-211019-175340R.MOV R/REC-211019-120514R.MOV RearCam 2021/10/19 17:53:25 [00:00:26] 2021/10/19 17:53:25 [00:00:26] Video file name information: REC_170809-163256F.MOV “REC” means normal video file “KEY”...
Parking Mode • Main Menu > Setting Mode > Parking Both front and rear cameras will record 30 monitoring (On/Off) Impact Mode seconds when detecting an impact and then (Parking monitoring) turn it off to keep the energy usage to a •...
Camera Installation Screw Nut: Just screw the nut when the cable connected but not twist the cable or the connector The concave and convex bayonet of the joint shall be matched correctly Double-sided foam tape Screw Double-sided foam tape Power Module Installation Double-sided foam tape Positive double-sided foam tape...
Smart Gauge Mode Long press the DOWN button in video mode to enter Smart Gauge Mode, and then short press to cycle through various information displays (e.g., speed, tire pressure, battery voltage) with each press. Long press it again to exit Smart Gauge Mode. Short-term Memory Battery Power Display Speed...
Need help?
Do you have a question about the S2F and is the answer not in the manual?
Questions and answers