Navigator Options; Creating New Profiles; Figure 14 Connect Tab - Raritan DOMINION KX User Manual

18
Ports displayed with a green icon indicate that you are connected to that port.
Bold type indicates which port is currently displayed (active) in the remote desktop area of the client.
For each server port entry, RRC navigator displays the following icons:
Connected (green)
Available for connection
Unavailable (no device connected, or access is blocked)
Unavailable (in use by another [PC Share mode off])

Navigator Options

Certain RRC Navigator attributes may be customized to your preferences.
Display / Hide Navigator – Toggle whether the RRC Navigator is shown. This option can
also be toggled by choosing View
Refresh Navigator – Update the device status information shown in the RRC Navigator.
Show Browsed Devices – Toggle whether RRC Navigator should display "Not Profiled"
devices automatically found on the network or show only devices for which profiles exist.
This option can also be toggled by choosing View
Note: The Browse connection method is the only method of connecting to a Raritan Device configured to
use DHCP IP addressing.

Creating New Profiles

Create a connection profile to store important information about your Raritan device, such as IP Address,
custom TCP ports, preferred compression settings, and custom security keys. A profile is required to access
devices outside your subnet, and for devices accessed via dial-up connection.
Individual users can create individual personal profiles, that is, profiles are not shared amongst multiple
users. The profile enables each user to set up a personalized connection.
Note: If your Raritan device is configured to use a custom TCP port (see Chapter 4: Administrative
Functions, Network Configuration), or a group security key (see Chapter 4: Administrative Functions,
System-Level Security Parameters), first create a connection profile so you can access the device.
1. There are two ways to create a profile. For devices automatically discovered, right-click on the device
name in the RRC Navigator and select Add Profile from the shortcut menu. For other devices, on the
Connection menu, click New Profile. The Add Connection dialog appears. Options are grouped into
three tabs.
a. Connect tab
Navigator from the Menu Bar.
All Devices from the Menu Bar.

Figure 14 Connect tab

D KX U M
OMINION SER ANUAL