Steamery Cirrus 3 Manual

Box content

1. Cirrus 3 Iron Steamer
2. Steaming Pad
3. Mouthpiece protective cover
4. Storage bag
5. User manual

Features

1. Heated front plate
2. Convex front plate
3. Stand up/lie down function
4. Steam button
5. On/off switch
6. Auto-shutdown
7. Water tank
8. Woven cord

Heated front plate
The front plate of Cirrus 3 Iron Steamer heats up to an equivalence of level 1 on an iron (140°C/284°F).

Convex front plate
The convex and textured surface has been developed to enhance the friction between the mouthpiece and the fabric. This effect will ease the process of smoothing out wrinkles.

Stand up/lie down function
Cirrus 3 Iron Steamer can be placed lying down on a flat surface, and thanks to the solid base, it can also stand on its own in an upright position.

Steam button
Press only while steaming in order to save water.

On/off switch
Leave the steamer plugged in while not in use and save time.

Auto-shutdown
The steamer will automatically power off after 30 minutes of being idle.

Water tank
The stable upright water tank slides into the body of the steamer with a smooth magnetic click and secure fit, regardless of the amount of water left in the 90 ml water tank.

Water and water quality

Even though Cirrus 3 Iron Steamer has limescale traps, it is important to use the right water in your steamer to prolong its life. Cirrus 3 Iron Steamer works on regular tap water, but make sure the water you are using is soft. If you live in a region with hard water, or if you are traveling and feel uncertain about the tap water quality, don't use tap water.

We recommend:

• Soft tap water
• Steamery's Steam Water
• Bottled or filtered still water (i.e., water meant for drinking)
• Distilled water
• Deionized water (also known as battery water)
• Unscented ironing water

Scan QR-code to purchase Steam Water

We do not recommend:

• Hard tap water
• Liquids other than water

User instructions

Preparations

1. Remove the water tank by pulling it in the opposite direction from the steamer body.
   
2. Gently lift the silicone plug on top of the water container and fill it.
   
3. Close the water tank and put it back in position in the steamer.
   
4. Remove the mouthpiece protective cover from the front plate.
   

Operating instructions

1. Plug the cord into a power outlet, press the on/off button.
2. Wait for approximately 25 seconds. The breathing light indicates that the steamer is heating up.
3. As soon as the light is steady, the steamer has reached the right temperature, and the front plate is warm enough.
4. Start steaming.

How to steam

Place your garment on a hanger and move the front plate against the fabric while pressing the steam button. Do not use the steamer for more than 30 minutes continuously. If you wish to use your steamer for more than 30 minutes, let it cool off for one hour in between uses.

Steaming from the outside
Grab the bottom of the garment and press the steamer against the fabric.

Steaming from the inside
Place the steamer on the inside of your garment, with the front plate towards you. Slowly move the mouthpiece against the fabric.

Use the Steaming Pad
Use the Steaming Pad to press the fabric against the steamer. This tool is great for steaming details like collars, cuffs, pockets, and hems.

Use as an iron
The steamer can also be used like an iron. Use a towel as a base for your clothes and press with the steamer as an iron. Great when you want a pressed effect.

Travel with Cirrus 3 Iron Steamer

• Cirrus 3 Iron Steamer is a great travel accessory that will keep your clothes wrinkle-free and fresh when you need to wear a limited wardrobe for days on end. But there are a few things to keep in mind.
• Check the voltage and frequency of your destination
• Before traveling with your steamer, it is important to check the voltage and frequency standards for your destination. Our steamers are produced with the appropriate voltage and frequency for the market where they are sold and should therefore never be used in a country where the voltage does not correlate with the steamer's capacity.
• Find out if you need to use an adapter
• Research if you can use the same plug in your destination country. If the plug is different, you need to use a travel adapter. To be clear, a travel adapter is useful only if the voltage and frequency are right.

Safety instructions

READ THE FULL MANUAL BEFORE USING YOUR STEAMER
When operating the steamer, and especially if children are present, safety precautions should always be taken.

Your steamer is always electrically live when it is plugged in. To reduce the risk of getting burned, fire, electrocution, or other injuries, always keep the following in mind:

1. Unplug the steamer when you refill the water tank or when cleaning it.
2. Do not keep the steamer where there is any risk of it falling into water.
3. Do not pull the power cord to remove the plug from the power outlet. Always pull from the plug.
4. Do not reach for an appliance that has fallen into water. Unplug immediately.
5. Use in a dry area only.
6. The steam is approximately 100°C (212°F) and may cause injury.
7. Allow the steamer to cool off before putting it away after steaming.
8. The steamer should not be used as a toy.
9. People younger than 18 years old should not operate the steamer.
10. Children should not clean or maintain the steamer.
11. Do not descale the steamer with corrosive acid. The steamer may turn the acid into gases that are lethal to inhale.
12. Do not use the steamer if the power cord is damaged, if it is not working properly, if it has been dropped to the ground, or damaged or dropped into water. Do not attempt to repair the appliance. Incorrect reassembly or repair could cause a risk of fire, electric shock, or injury to persons when the appliance is used. Return the appliance to an authorized service center for examination and repair.
13. Do not use this steamer in any other way than that described in this manual.
14. This appliance has a polarized plug – always use it in a socket with earthing.
15. If you want to use an extension cord, it must be an earthed cable.
16. Do not operate the steamer without properly filling the water container with water.
17. Burns could occur from touching hot parts, hot water, or steam. Make sure to always wear the included heat resistant Steaming Pad on your free hand while steaming to prevent burns.
18. To reduce the risk of circuit overload, do not operate anything other than your steamer (a high-wattage appliance) on the same circuit.
19. Do not steam your own or any other person's clothes while they are wearing them.

DO NOT THROW THIS MANUAL AWAY. SAVE IT AND KEEP IT TOGETHER WITH THE STEAMER.

Specifications

Origin: China
Certificates: CE, CB, RoHS, PSE, CQC, cETLus, UKCA
Model: Cirrus No.3-1 Iron Steamer Importer: Steamery AB
Voltage, frequency, and power:
EU, IL, UK, CH: AC220-240V~, 50-60Hz, 1098-1307W
US, CA: AC120V~, 60Hz, 1200W
TW:AC110V~, 60Hz, 1200W
JP: AC100V~, 50-60Hz, 1200W
CN: AC220V~,50Hz, 1200WKR: AC220V~,60Hz, 1200W
Net weight: 860 g
Gross weight: 1500 g
Woven cord: 2.3 m
Start-up time: 25 seconds

To learn more about Steamery, our products, and garment care in general, please visit our website www.steamerystockholm.com or e-mail us at info@steamerystockholm.com.
Scan QR-code to visit website