Huawei WiFi Q2 Pro Installation Manual

Installation Guide
How do I configure my HUAWEI WiFi Q2 Pro for the first time?
Once you have configured the first router from the pack, you can simply connect the power
supplies of the other two and wait for their indicators to turn steady blue to gain Internet access.
1. Connect the Ethernet cable.
Take out one of the routers from the pack (any one of the three routers can be configured
as the main router) and connect the power supply and Ethernet cable.
 Install the HUAWEI SmartHome app.
Scan the QR code at the bottom of your router to download and install the HUAWEI SmartHome
app (the app used to configure your routers).

You can also download and install the app from your app store by searching "HUAWEI
SmartHome". For Android users, go to your Google Play Store; for iOS users, go to your
App Store.

If you have a pre-installed HUAWEI SmartHome app on your phone, ensure that it is up-
to-date.
 Configure your routers through the app.
a. Connect your phone to your router's Wi-Fi (no password is required). Your router's Wi-Fi
name can be found at the bottom of the connected router.
o Some iOS users may receive a pop-up notification. In this case, touch Cancel in
the upper right corner of the pop-up screen, then touch Use Without Internet to
return to the home screen (or touch Finish on the pop-up screen).