Related Manuals for Hyundai power products HYSH2800E
Summary of Contents for Hyundai power products HYSH2800E
- Page 1 2800W Garden Shredder HYSH2800E Instruction Manual WARNING: Read the instructions carefully before use.
-
Page 2: Table Of Contents
Contents Introduction……..……………………………3 Recycling And Disposal..………………...31 Safety Information…..………………….4-14 Declaration Of Conformity…..…………..32 Understand Your Machine.…..…………...4 Personal Safety...…….……………………4-5 Notes……………………….…..………..33-34 Inspect Your Machine…………………..5-6 Work Area…….……………………………..6 Useful Information…..……………………..35 During Use…….…………………………….7-8 Our YouTube Channel…..………………..35 Electricity….…………………………..…...9-10 Warranty……………………………………..35 Double Insulated Devices…..……..10 Manual Updates….……………………….35 Vibrations….…………………………...11 Returning Your Product….……………….35 Noise…….……………………………...11 Leaving A Review….……………………...35 Residual Risks…………………....11 Ordering Spare Parts.……………………...35... -
Page 3: Introduction.........................................3 Recycling And Disposal
THE MACHINE. Keep for future reference and pass it on if the machine is loaned or sold to another user. This manual has been produced by Hyundai Power Products and should be kept with the product. Please read and understand these instructions before you use your product. -
Page 4: Safety Information...........................4-14 Declaration Of Conformity
Safety Information Understand Your Machine • WARNING! You must read these instructions carefully before operating the machine. Make sure that you are familiar with the controls and properly operate the machine. You must learn how to stop the machine quickly. If you do not follow the warnings and instructions, it may result in fire and/or serious injury. -
Page 5: Inspect Your Machine
Safety Information Personal Safety (Continued) • Do not touch parts that might be hot from operation. Allow parts to cool before attempting to maintain, adjust, or service. • Do not overreach. Keep proper footing and balance at all times. This enables better control of the machine in unexpected situations. -
Page 6: Work Area
Safety Information Inspect Your Machine (Continued) • Keep the machine in good operating condition. Operating the machine in poor or questionable condition could result in serious injury. • Be sure all safety devices are in working order and warning labels are in place. These items are installed for your safety. -
Page 7: During Use
Safety Information During Use • Do not operate the machine in confined areas where there may be a risk of crushing the operator between the machine and another object. • Never attempt to make any adjustments, while the machine is running. •... - Page 8 Safety Information During Use (Continued) • Before starting the machine, make sure that the feeder is empty. • WARNING! This power tool generates an electromagnetic field during operation. Under certain circumstances, this field may affect active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend that individuals with medical implants consult your physician and the manufacturer of the medical implant before operating the machine.
-
Page 9: Electricity
Safety Information Electricity (Where Applicable) DANGER : ELECTRICITY CAN KILL – NEVER WORK ON LIVE / ENERGISED EQUIPMENT. • Prior to carrying out any maintenance work you MUST identify electrical isolation methods and isolate all electrical supplies. • Prior to use and with all electrical supplies isolated, you MUST check all electrical cables, plugs and connectors for the following;... -
Page 10: Double-Insulated Appliances
Safety Information Electricity (Continued) • To prevent electric shock, use only with an extension cord suitable for outdoor use. For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30mA is advisable. •... -
Page 11: Vibrations
Safety Information Vibrations (Where Applicable) • Prolonged use of hand held (operated) machines will cause the user to feel the effects of/from vibrations. These vibrations can lead to white finger (Raynaud’s phenomenon) or carpal tunnel syndrome. This condition reduces the ability of the hand to feel and regulate temperature, causing numbness and heat sensations and may cause nerve damage and circulatory tissue death. -
Page 12: Intended Use
Safety Information Intended Use The HYSH2800E is a corded-electric 2800W garden shredder from HYUNDAI. Intended Use This machine is designed exclusively for shredding fibrous or woody garden waste such as hedge and tree trimmings, branches, bark or fir cones. This machine must NOT be filled with stones, glass, metal, bones, plastics, material waste or any foreign object that can cause damage to the blades. -
Page 13: Personal Protective Equipment
Safety Information Personal Protective Equipment Appropriate Personal Protective Equipment (PPE), MUST be worn at all times when operating or repairing the machine. No protective equipment can ensure 100% protection. When selecting PPE, make sure it’s CE marked and it suits the user in terms of size, fit, etc. -
Page 14: Symbols On The Machine
Safety Information Symbols On The Machine We have provided safety messages in this manual and on the machine. This information alerts you to potential hazards that could hurt you or others. Please read these messages carefully. However, we may not have listed all of the possible hazards, you must also use your own judgement. -
Page 15: Unboxing.............................................15 Contact Us
2. Lay the contents out and check them. If any part is damaged or missing, you must not use the machine. Contact HYUNDAI POWER PRODUCTS immediately. 3. You must keep the packaging material in case the machine needs to be returned or repaired. -
Page 16: In The Box
In The Box 2800W Garden Shredder (Main Unit) – Line Drawing displays full unit with Collection Bag Designed for shredding fibrous or woody garden waste. Right-hand side Bracket This slots into the main unit and connects to the axle. Left-hand side Bracket This slots into the main unit and connects to the axle. -
Page 17: Features
Features 2800W Garden Shredder (Main Unit) Designed for shredding fibrous or woody garden waste. Paddle Use this to press garden waste through the inlet chute. 45L Collection Bag This is where the fibrous/woody garden waste gets collected once processed. Housing Lock This locks/unlocks the main unit’s cover. -
Page 18: Assembly
Assembly Assembly Overview There are 3 steps to the assembly: STEP 1. Building The Wheel Assembly STEP 2. Attaching The Wheel Assembly To The Main Unit STEP 3. Attaching The Collection Bag To The Main Unit STEP 1: Building The Wheel Assembly NOTE: This section requires the left and right brackets, 2 x bushings, 2 x wheels, 2 x wheel covers, 2 x hex nuts &... -
Page 19: Building The Wheel Assembly
Assembly STEP 1: Building The Wheel Assembly (Continued) 3. Slide and place the wheel over the bushing. 4. Secure the wheel in place with 1 x washer and 1 x hex bolt. Ensure the washer sits flush with the wheel before placing the hex bolt over the washer. 5. -
Page 20: Attach Wheel Assembly To Main Unit
Assembly STEP 2: Attaching The Wheel Assembly To The Main Unit NOTE: This step requires a Phillips screwdriver (included with the box contents of this product). NOTE: Both of the bracket housings located on the main unit will be fitted with a Phillips screw. -
Page 21: Attach Collection Bag To Main Unit
Assembly STEP 3: Attaching The Collection Bag To The Main Unit 1. Locate the two collection bag fixing points on the left and right-hand sides of the main unit. 2. Hook both of the collection bag’s fixing loops over the two fixing points. NOTE: Ensure the collection bag is suitably placed beneath the main unit’s outlet chute for best and efficient use. -
Page 22: Operation
Operation Before Starting (Perform Checks) 1. Ensure the machine is in good working order. If damaged, do not use and seek assistance of qualified personnel to perform the necessary maintenance. 2. Check the condition of the cable before switching on the power. 3. -
Page 23: Restart Procedure
Operation Restart Procedure WARNING! In the event of needing to remove a blockage from the blades within the main unit or from the inlet chute, a full restart will be required. WARNING! NEVER attempt to remove a blockage or perform maintenance with the motor still running and connected to the power source. -
Page 24: Using The Paddle
Operation Using The Paddle Your fingers must NEVER enter the inlet chute. NEVER use the paddle stick if the main unit is not fitted. DO NOT over reach. NOTE: There is a paddle stick provided to help feed less bulky material such as small twigs, leaves, other garden waste and vegetation into the inlet chute. -
Page 25: Maintenance & Care
Maintenance & Care General Maintenance WARNING! Turn OFF the machine, allow all moving parts to come to a complete stop and disconnect from the power source before maintaining the machine. WARNING! You must ALWAYS wear protective clothing and protective gloves whenever performing maintenance on the machine. -
Page 26: Blade Replacement
Maintenance & Care Blade Replacement ALWAYS wear gloves when working on the shredder’s blades. WARNING! Ensure the machine is switched off and the plug has been disconnected from the power supply. Moving blades can cause serious injury. WARNING! Only replace worn or damaged parts with original replacements. Parts used from other manufacturers may damage the machine and can lead to the risk of serious injury. -
Page 27: Storage
Maintenance & Care Storage Keep the machine stored in a dry, level area away from damp, moisture and rain fall. Allow the machine to cool down before storing. • Make sure the machine is clean and dry before storing. You can keep the cable tidy by wrapping it around the hook on the rear of the machine. -
Page 28: Replacement Parts/Spares
Replacement Parts/Spares Information No Hassle Returns Same Day Dispatch* Over 10,000 Spare Parts QR Code – Scan the QR code for a direct link to our website Our Website : power-spares.co.uk Call us : 01646 404406 Email us : sales@power-spares.co.uk To maintain your machine in peak operating condition, proper maintenance and care are crucial. -
Page 29: Troubleshooting
Maintenance & Care Troubleshooting Problem Possible Cause Solution Power failure/unit is not plugged Check to make sure the into a working socket. unit is plugged into a working outlet. Check the extension cable is not damaged. Motor not running The overload protection has Remove possible debris. -
Page 30: Technical Data
Technical Data Specification Model HYSH2800E Power 2800W (P40) Frequency 50Hz 45mm Maximum Branch Thickness Collection Bag Volume 95.8dB(A) Sound Pressure Level (LpA) 103.37dB(A) Sound Power Level (LwA) 106dB(A) Guaranteed Sound Power Level IPX4 Protection Type Net Weight 9.3kg www.hyundaipowerproducts.co.uk... -
Page 31: Recycling And Disposal
Recycling & Disposal Recycling & Disposal We do not offer a takeback scheme for the recovery of Waste Electrical Electronic Equipment (WEEE) & Batteries. Instead the responsibility to dispose of WEEE and/or Batteries is passed onto you by us. So when it becomes necessary to dispose of your machine you must take it to your local Civic Amenity Site. -
Page 32: Eu Declaration Of Conformity
Genpower Ltd Isaac Way, Pembroke Dock, SA72 4RW Country of Origin: China Description: 2800W Garden Shredder SKU Code: HYSH2800E Date of Issue: 29/05/2024 Regulations and Directives of Compliance • EC Council Directive (EU) 2014/30 Electromagnetic Compatibility • EC Council Directive 2006/42/EC Machinery... -
Page 33: Notes
Notes www.hyundaipowerproducts.co.uk... - Page 34 Notes www.hyundaipowerproducts.co.uk...
-
Page 35: Useful Information
Go to YouTube and search ‘Hyundai Power Products’. Warranty Proof of purchase will be required before you make a warranty claim. Full warranty terms and conditions can be found on the HYUNDAI POWER PRODUCTS website: www.hyundaipowerproducts.co.uk Manual Updates Our manuals are constantly being reviewed and updated. Should you find an error, omission or something unclear, please contact us for assistance. -
Page 36: Product Record
Product Record Information As soon as you have purchased the machine, we recommend that you fill out the following. If you need to contact an authorised dealer or customer service for information on servicing, you may need to provide the following information. Date Of Purchase:……………………………………………………………………………….. - Page 37 Contact Us Need Help? Talk To Our Experts Our friendly aftersales team will be more than happy to help you. Phone Call our team on 01646 687 880 Email aftersales@hyundaipowerproducts.co.uk Online Live Chat Go to www.hyundaipowerproducts.co.uk Post Genpower Ltd, Isaac Way, Pembroke Dock, Pembrokeshire, SA72 4RW. Hyundai Support Website Go to hyundaisupport.co.uk www.hyundaipowerproducts.co.uk...
- Page 38 For Inquiries, Please Contact: GENPOWER LTD Isaac Way, London Road, Pembroke Dock, UK, SA72 4RW. T: +44 (0) 1646 687 880 E: info@hyundaipowerproducts.co.uk www.hyundaipowerproducts.co.uk Imported / Distributed by Genpower Ltd for Licensed by Hyundai Corporation Holdings, Korea the United Kingdom & Ireland...
Need help?
Do you have a question about the HYSH2800E and is the answer not in the manual?
Questions and answers