Do a quick inventory Customers & AK-HI-PR orders: of all the parts and & Replacement Parts within the RTA Products will replace the part free of hardware listed below. 48 Contiguous United States: charge, while the customer is responsible for shipping costs plus any International Please email us at: local taxes or duties.
RTA-507DT ASSEMBLY STEPS WE RECOMMEND TO PLACE THE PIECES OVER BLANKETS OR TABLECLOTHS TO PROTECT THEIR FINISH DURING ASSEMBLY. STEP 1 FIRST: Attach the tee nuts D to the bottom of the legs #1 Hardware and #2, and the dowels C BUT ONLY AT THE TOP OF #2.
Page 4
RTA-507DT STEP 2 This step FIRST: Identify on panel #3 which are its top and bottom surfaces. requires of 2 persons Hardware U R F A C R F A C O M S U T O P S B O T T...
Page 5
RTA-507DT STEP 3 This step FIRST: Carefully place the wood tabletop requires of 2 persons #4 over the panel #3 as shown. Hardware 25mm Tools (Not included) THEN: Secure the wood tabletop #4 to panel #3 with screws B from underneath.
Page 6
RTA-507DT STEP 4 This step FIRST: Attach the silicone bumpers F to the requires of 2 persons tabletop #4. Below are the recommended Hardware positions and distances from the side edges. Kits Bumpers Touch-up THEN: Carefully place the glass top #5 over the silicone bumpers aligning with the tabletop #4.
RTA-507DT WARNINGS Not paying attention to the following warnings could result in injuries. WEIGHT LIMIT - DO NOT EXCEED (40 Kg) Do not sit, climb or stand on the table. ABOUT THE TEMPERED GLASS REGULAR GLASS TEMPERED GLASS The top is made of Safety Tempered Glass, which is safer than regular glass. If the glass accidentally breaks, DO NOT handle the broken glass with your bare hands and keep children and pets away.
Need help?
Do you have a question about the TECHNI HOME RTA-507DT and is the answer not in the manual?
Questions and answers