Handi-lift Table of Contents Introduction Use the product on a regular basis. Check the function of the lift Check the charging points. Check the switches Check all Stanchions Check all screws Grease the gear rack Do not shut off the main switch Cleaning 1.9.1 Maintenance...
1 Introduction Products mounted on a Wessel are often exposed to high humidity and a lot of salt in the air. The marine treated platform lift from Cama is developed so that it can operate under those conditions. Since the product can differ in configuration, it is not possible to have one complete IP rating for the entire product.
1.3 Check the charging points. The charging points (only on the EA6) mounted both on the rail and on the lift must be inspected on a regular basis, as it is a wear part. Therefore, we recommend that you check it for wear and corrosion on a regular basis and that they are replaced regularly.
(EA7/EA9) and the curved inclined platform lift (EA6). The rack and pinion system on the EA7/EA9 must be greased with traditional grease. Since the wheels on the EA6 are made of nylon with a steel core you are NOT allowed to use grease at all.
Page 6
Handi-lift easiest way to do that is to use a vacuum cleaner. In winter, please remove ice and snow from the rail and the driving lane/landing. Please think about ordering an extra cover for your lift. This will protect your lift against the bad weather.
Depending on location this must be done four times a year. Maintenance includes safety checks that are basic for safety and condition of your lift. It should only be done by Cama or by a company authorized by Cama. 1.9.2 Service The following service must be fixed in time.
Need help?
Do you have a question about the EA6 and is the answer not in the manual?
Questions and answers