Operating System; Network Connectivity And Configuration Requirements - 3Com TRANSCEND EM/NT 6.3 Installation Manual

Operating System

Network Connectivity
and Configuration
Requirements
SVGA (800x600) capable display adapter and monitor with a
I
minimum of 64K colors set
CD-ROM
I
Mouse or other pointing device supported by Windows
I
Ethernet network adapter
I
Transcend runs on Windows 95 or Windows NT 4.0 (Server or
Workstation). Windows NT must have Service Pack 4 installed.
The information below was accurate at the time this guide was printed. If
you find the information below is out of date, please go to the following
3Com Technical Support Web site for the latest install information:
support.3com.com/nav/trans_net_man.htm
Download Windows NT Server 4.0 Service Pack 4 from:
www.microsoft.com/ntserver/nts/downloads/recommended/nt4svcp
k4/nt4svcpk4.asp
Download Windows NT Workstation 4.0 Service Pack 4 from:
www.microsoft.com/technet/year2k/product/ussr_view68481EN.htm
Transcend requires that your workstation have a unique static IP address
and an Ethernet network adapter card (EtherLink
recommended). Be sure that your workstation has network connectivity
before you install Transcend.
Verify that your workstation has the following:
Windows TCP/IP stack is installed
I
Network adapter is properly configured
I
IPX stack is installed (Client/Gateway for Netware)
I
IP address is correct
I
Subnet mask is correct
I
DNS host name matches the name in the network DNS server
I
Default gateway is correct
I
Workstation Requirements
® III NIC is
11