1. Manuals
  2. Brands
  3. AXIOMTEK Manuals
  4. Touch Panel
  5. GOT521-RPL-WCD
  6. User manual

AXIOMTEK GOT521-RPL-WCD User Manual

All-in-one 21.5” fhd tft fanless pct multi-touch panel pc
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
GOT521-RPL-WCD
All-in-One
21.5" FHD TFT Fanless
PCT Multi-Touch Panel PC
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GOT521-RPL-WCD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AXIOMTEK GOT521-RPL-WCD

Summary of Contents for AXIOMTEK GOT521-RPL-WCD

  • Page 1 GOT521-RPL-WCD All-in-One 21.5” FHD TFT Fanless PCT Multi-Touch Panel PC User’s Manual...

  • Page 2: Disclaimers

    Axiomtek does not make any commitment to update any information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any forms or by any means, electronic, mechanical, photocopying, recording, among others, without prior written permission from Axiomtek Co., Ltd.

  • Page 3: Safety Precautions

     When handling boards and components, wear a grounding wrist strap available from most electronic component stores. Trademark Acknowledgments Axiomtek is a trademark of Axiomtek Co., Ltd. Intel ® and Pentium ® are registered trademarks of Intel Corporation.

  • Page 4: Table Of Contents

    Table of Contents Disclaimers ..................... ii Safety Precautions ..................iii SECTION 1 INTRODUCTION ........1 General Descriptions ................1 Specifications ..................3 Dimensions and Outlines ..............5 I/O Outlets .................... 6 Packing List ..................7 SECTION 2 SYSTEM CONFIGURATIONS ....8 I/O Pin Assignment ................
  • Page 5 Chipset Menu ..................42 Security Menu ..................43 Boot Menu ..................46 Save & Exit Menu ................49 SECTION 4 DRIVER AND INSTALLATION ....51 Operating System ................51 4.1.1 Driver download ..................... 51 Touch Screen ..................52 4.2.1 Specification ....................52 Embedded O.S.
  • Page 6 This page is intentionally left blank.

  • Page 7: Section 1 Introduction

    GOT521-RPL-WCD User’s Manual SECTION 1 INTRODUCTION This section contains general information and detailed specifications of theGOT521-RPL-WCD, including the following subsections: Figure 1-1 Front panel of theGOT521-RPL-WCD General Descriptions ⚫ Specifications ⚫ Dimensions and Outlines ⚫ I/O Outlets ⚫ Packing List ⚫...
  • Page 8 GOT521-RPL-WCD User’s Manual Reliable and stable design TheGOT521-RPL-WCD is specifically designed for vibration-prone environments, best for the transportation (vehicle, railway, marine) and industrial machinery markets. With a patented anti- vibration design, theGOT521-RPL-WCD is able to work in operation mode under 1G (5 ~ 500Hz), which has significantly improved system reliability and sustainability.

  • Page 9: Specifications

    GOT521-RPL-WCD User’s Manual Specifications ⚫ Intel® Core™ i5-1335UE (1.3 GHz, 15W) Intel® U series U300E (1.1 GHz, 15W) ⚫ Chipset SoC integrated ⚫ System Memory 1 x DDR5 4800MHz SO-DIMM socket (Max. up to 32GB) ⚫ BIOS American Megatrends Inc. UEFI (Unified Extensible Firmware Interface) BIOS.
  • Page 10 GOT521-RPL-WCD User’s Manual ⚫ Weight(Net/Gross) 7.5 kg (16.53 lb)/11 kg (24.25 lb) ⚫ Dimensions System: 531.6mm(20.93")(W)x60.5mm(2.38")(D)x 318mm(12.52")(H) Packing: 728mm (28.66")(W) 518mm (20.39")(D) 271mm (10.67")(H) ⚫ Operating temperatures -20°C to 50°C (-4°F to +122°F) ⚫ Storage temperatures -10°C to 50°C (+14°F to +122°F) ⚫...

  • Page 11: Dimensions And Outlines

    GOT521-RPL-WCD User’s Manual Dimensions and Outlines The figures below show the dimensions and outlines of theGOT521-RPL-WCD panel PC. Front dimensions: 531.6mm(20.93")(W)x60.5mm(2.38")(D)x 318mm(12.52")(H) Introduction...

  • Page 12: I/O Outlets

    GOT521-RPL-WCD User’s Manual I/O Outlets Please refer to figure 1-4 for the I/O locations of theGOT521-RPL-WCD. Figure 1-4: Front and bottom views of theGOT521-RPL-WCD. Note. Note. 1 x Optional M12 I/O blank via DC power input cable: 2 x USB 2.0,...

  • Page 13: Packing List

    GOT521-RPL-WCD User’s Manual Packing List A complete bundled package should contain the following items: GOT521-RPL-WCD unit x 1 ⚫ M12 DC Power cable x 1 ⚫ Please contact an Axiomtek distributor immediately if any of the above-mentioned items is missing. Introduction...

  • Page 14: Section 2 System Configurations

    GOT521-RPL-WCD User’s Manual SECTION 2 SYSTEM CONFIGURATIONS TheGOT521-RPL-WCD provides rich I/O ports and flexible expansion features for users to perform various tasks. This section provides detailed information on the hardware components of the panel PC as well as installation instructions, including the following subsections: Board Layout ⚫...

  • Page 15: Ethernet

    GOT521-RPL-WCD User’s Manual 2.1.2 Ethernet TheGOT521-RPL-WCD is equipped with a high-performance Plug and Play Ethernet interface, full compliant with IEEE 802.3 standard, and can be connected with a M12 LAN connector. Please refer to detailed pin assignment list below: 2.5GBE LAN...

  • Page 16: Usb Port

    GOT521-RPL-WCD User’s Manual 2.1.3 USB Port The USB is a Universal Serial Bus (compliant with USB 2.0 (480Mbps)) connector on the rear I/O. It is commonly used for installing USB peripherals such as keyboard, mouse, scanner, etc. Signal Signal USB VCC (+5V level)

  • Page 17: Full-Size Pci Express Mini Card Slot (Cn17)

    GOT521-RPL-WCD User’s Manual 2.1.5 Full-Size PCI Express Mini Card Slot (CN17) TheGOT521-RPL-WCD supports one full-size PCI-Express Mini Card slots. CN16 is applying for PCI-Express or SATA (mSATA) via BIOS selection and USB signals; PCI-Express complies with PCI-Express Mini Card Spec. V1.2. Thus, users can install mSATA or WLAN/WWAN cards into this slot.

  • Page 18: Key E (Cn18)

    GOT521-RPL-WCD User’s Manual 2.1.6 M.2 Key E (CN18) The M.2 Key E for Wireless Module. Pin Signal Pin Signal Pin Signal Pin Signal +3.3V USB_D+ +3.3V USB_D- 10 NC 12 NC 13 NC 14 NC 15 NC 16 NC 17 NC...

  • Page 19: Sim Slot (Cn14)

    GOT521-RPL-WCD User’s Manual 2.1.7 SIM Slot (CN14) TheGOT521-RPL-WCD has one SIM slots: CN16 on top side that support mini PCIe slot (for CN16). It is mainly used in wireless network application. Signal M12 I/O blank Cables (Optional) GOT500 series uses specific M12 connector for water-proof. Therefore, you will order each cable base on application.

  • Page 20: Usb Cables

    GOT521-RPL-WCD User’s Manual 2.2.2 USB cables The USB cable is combined M12 connector for water-proof. It is extended two USB ports for application. 2.2.3 LAN cables The LAN cable is combined M12 connector for water-proof. It is extended one LAN ports for use.

  • Page 21: Canbus Cables

    GOT521-RPL-WCD User’s Manual 2.2.4 CANbus cables 2.2.5 Power cables The power cable includes a combined M12 connector for water-proofing, and it features a DC input with an ACC function. It extends to one additional port for use. DC input with ACC functionality...

  • Page 22: Power Adapter

    GOT521-RPL-WCD User’s Manual 2.2.6 Power adapter If you order the power adapter, you should choose the power cord type for your location. The power adapter is 110-240V which is combined M12 connector. Hardware Installation (Optional) 2.4.1 Installing DRAM TheGOT521-RPL-WCD provides one 262-pin DDR5 SO-DIMM socket that supports system memory up to 32GB.
  • Page 23 GOT521-RPL-WCD User’s Manual Step 3 Locate the DIMM socket on the mainboard, as shown below. Step 4 Prepare thermal pad, the system will come with 1pcs thermal pad in accessory pack. The thermal pads will come with plastic liner on one side, so make sure it is removed before use.

  • Page 24: Installing The Nvme Ssd, Mini Card & M.2 Key E Module

    GOT521-RPL-WCD User’s Manual Step 6 Put the bottom cover and fasten all the screws onto the system. 2.4.2 Installing the NVMe SSD, Mini Card & M.2 key E Module TheGOT521-RPL-WCD comes equipped with a mini card slot, an optional M.2 key E slot and a M.2 key M slot for users to install wireless LAN cards and SSD.
  • Page 25 GOT521-RPL-WCD User’s Manual Step 2 Locate the Mini card socket on the mainboard, as shown below. 1.Installing the NVMe SSD: Insert the NVMe SSD into the designated M.2 slot. Ensure it is aligned properly with the connector, then gently push down and secure it with a screw.
  • Page 26 GOT521-RPL-WCD User’s Manual 3. Installing the M.2 key E 2230 Module: Position the M.2 key E module in its corresponding slot. Align it correctly and push it into place, then fasten it with a screw to secure. Remove the screw from the top of the system's back cover.

  • Page 27: Mounting The Panel Pc

    GOT521-RPL-WCD User’s Manual Mounting the Panel PC Only trained and qualified technicians are permitted to mount the product. To prevent accidental damage to the product or human injury WARNING when mounting the product, at least two people are required to perform the installation.
  • Page 28 GOT521-RPL-WCD User’s Manual Step 2 As shown in the image, attach the VESA mount kit to the back cover of the tablet. Tighten the four screws to securely fasten the VESA arm kit to the back cover. 【Note】 This display supports vertical installation. To rotate the I/O ports by 90 degrees, simply adjust the mount to the desired orientation.
  • Page 29 GOT521-RPL-WCD User’s Manual This page is intentionally left blank. System Configurations...

  • Page 30: Section 3 Ami Bios Setup Utility

    GOT521-RPL-WCD User’s Manual SECTION 3 AMI BIOS SETUP UTILITY This section provides users with detailed descriptions about how to set up basic system configurations through the AMI BIOS setup utility. Starting To enter the setup screens, follow the steps below: Turn on the computer and press the <Del>...

  • Page 31: Main Menu

    GOT521-RPL-WCD User’s Manual Main Menu When you first enter the setup utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. System Time/Date can be set up as described below.

  • Page 32: Advanced Menu

    GOT521-RPL-WCD User’s Manual Advanced Menu The Advanced menu allows users to configure the CPU and other system devices. You can select any of the items in the left frame of the screen to go to the sub menus ► CPU Configuration ►...
  • Page 33 GOT521-RPL-WCD User’s Manual ► CPU Configuration Hyper-Threading Enable or disable Hyper-Threading Technology. When enabled, it allows a single physical processor to multitask as multiple logical processors. When disabled, only one thread per enabled core is enabled. Intel (VMX) Virtualization Technology Enable or disable Intel Virtualization Technology.
  • Page 34 GOT521-RPL-WCD User’s Manual CPU performance -Turbo Mode Dynamic: Typical power consumption is 13W, with Turbo power consumption at 21W; recommended airflow is 0.4 CFM. Maximum: Typical power consumption is 15W, with Turbo power consumption at 28W; recommended airflow is 0.7 CFM.
  • Page 35 GOT521-RPL-WCD User’s Manual ► MISC. Configuration Use this screen to select options for the MISC configuration and change the value of the selected option. A description of the selected item appears on the right side of the screen. Mini card device AUTO: System will detect device (PCIe/mSATA) automatically.
  • Page 36 GOT521-RPL-WCD User’s Manual SMbus Interface If your mini card device has SM bus or I2C interface, please select “Enable”. M.2 2280 device AUTO: System will detect M.2 SSD type (NVMe/SATA) automatically. SATA: Force to SATA SSD AMI BIOS Setup Utility...
  • Page 37 GOT521-RPL-WCD User’s Manual OSD 3rd Key Function The "OSD 3rd Key Function" setting in this BIOS screen allows you to configure the function of the OSD (On-Screen Display) third key. The available options are: • Touch On/Off: Toggles the touch functionality on or off.
  • Page 38 GOT521-RPL-WCD User’s Manual This setting provides flexibility for controlling touch and display features directly from the OSD. Status LED Brightness This BIOS screen shows the Status LED Brightness setting under MISC. Configuration. It allows you to adjust the brightness level of the status LED on the device. The available options are: •...
  • Page 39 GOT521-RPL-WCD User’s Manual After installing the operating system graphics card driver, the backlight adjustment function can be turned on. No functionality in other environments. Detect time The chosen value determines how frequently the system will adjust the brightness based on ambient light conditions.
  • Page 40 GOT521-RPL-WCD User’s Manual SATA Configuration During system boot up, BIOS automatically detects the presence of SATA devices. In the SATA Configuration menu, you can see hardware currently installed in the SATA port. NVMe Configuration This screen shows NVMe device information.
  • Page 41 GOT521-RPL-WCD User’s Manual ► Trusted Computing You can use this screen for TPM (Trusted Platform Module) configuration. It also shows current TPM status information. ► AMT Configuration The AMT Configuration menu in the BIOS allows users to enable or disable Intel Active Management Technology (AMT) BIOS Features.
  • Page 42 GOT521-RPL-WCD User’s Manual When enabled, AMT BIOS Features provide remote management capabilities, allowing IT administrators to monitor, diagnose, and manage the system even when the OS is not running. Note: Disabling this setting does not disable all manageability features in the firmware. Some remote management functionalities may still be available at the firmware level.
  • Page 43 GOT521-RPL-WCD User’s Manual Serial Port 1 Enable or disable serial port 1. The optimal setting for base I/O address is 3F8h and for interrupt request address is IRQ4. COM Port Type Use this item to set RS-232/422/485 communication mode and default set is RS-232.
  • Page 44 GOT521-RPL-WCD User’s Manual ► USB Configuration USB Devices Display all detected USB devices AMI BIOS Setup Utility...
  • Page 45 GOT521-RPL-WCD User’s Manual ► Network Stack Configuration The Network Stack configuration in the BIOS enables network-related boot options, allowing the setup of PXE (Preboot Execution Environment) booting and UEFI network support." Network Stack Enabled: The UEFI Network Stack is turned on, allowing network booting via PXE.
  • Page 46 GOT521-RPL-WCD User’s Manual ► Smart Ignition Management The Smart Ignition Management settings in the BIOS allow for configurations tailored to automotive or industrial environments where power management is critical. Ignition Management: Currently Disabled. Enabling this would allow for additional power control based on ignition signals, useful for in-vehicle scenarios.
  • Page 47 GOT521-RPL-WCD User’s Manual This screen shows advanced settings under Smart Ignition Management, specifically focused on voltage triggers and shutdown delay timers. Here’s a summary: Voltage Triggers: Activate Voltage Trigger (V): Set to 9V. When the input voltage rises to or above this level, certain power functions may be activated.

  • Page 48: Chipset Menu

    GOT521-RPL-WCD User’s Manual Chipset Menu The Chipset menu allows users to change the advanced chipset settings. The Chipset menu here shows the System Agent (SA) Configuration options, which allow you to control various advanced chipset settings. Here are the main options available in this...

  • Page 49: Security Menu

    GOT521-RPL-WCD User’s Manual In-Band ECC Support: ECC (Error-Correcting Code) memory can detect and correct memory corruption. This option is Disabled, meaning ECC support is not active for this configuration. GNA Device (B0:D8): This likely refers to Intel’s GNA (Gaussian & Neural Accelerator) for low-power AI workloads, such as voice or noise suppression.
  • Page 50 GOT521-RPL-WCD User’s Manual Secure Boot Secure Boot feature is Active if Secure Boot is Enabled or Disable AMI BIOS Setup Utility...
  • Page 51 GOT521-RPL-WCD User’s Manual Secure Boot Mode Secure Boot mode options Standard or Custom Key management Install factory default Secure Boot key the platform rest and while the System is in Setup mode. AMI BIOS Setup Utility...

  • Page 52: Boot Menu

    GOT521-RPL-WCD User’s Manual Boot Menu ⚫ Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. ⚫ Bootup NumLock State Use this item to select the power-on state for the keyboard NumLock. ⚫ Quiet Boot Select to display either POST output messages or a splash screen during boot-up.
  • Page 53 GOT521-RPL-WCD User’s Manual AMI BIOS Setup Utility...
  • Page 54 GOT521-RPL-WCD User’s Manual AMI BIOS Setup Utility...

  • Page 55: Save & Exit Menu

    GOT521-RPL-WCD User’s Manual Save & Exit Menu The Save & Exit menu allows users to load your system configuration with optimal or fail-safe default values. Save Changes and Exit When you have completed the system configuration changes, select this option to leave Setup and return to Main Menu.
  • Page 56 GOT521-RPL-WCD User’s Manual Restore Defaults Restore or Load Default values for all the setup options. Discard Changes Select this option to quit Setup without making any permanent changes to the system configuration. Select Discard Changes from the Save & Exit menu and press <Enter>. Select Yes to discard changes.

  • Page 57: Driver And Installation

    10/11 IoT Enterprise. To facilitate the installation of system drivers, please carefully read the instructions in this section before any of such installation. 4.1.1 Driver download 1. Please download the followingGOT521-RPL-WCD driver from Axiomtek official website Support->Downloads->select a product series->Search by Product Category 2. Please follow below Steps to install driver inGOT521-RPL-WCD.

  • Page 58: Touch Screen

    GOT521-RPL-WCD User’s Manual Touch Screen TheGOT521-RPL-WCD is designed based on the technology of projected capacitive multi- touch screen of which specifications are listed below 4.2.1 Specification Touch Screen 10-point Projected capacitive multi-touch Communications USB interface Transparency > 85% Input Method Finger or Cap.Stylus...

  • Page 59: Appendix Atpm Bitlocker Settings

    GOT521-RPL-WCD User’s Manual APPENDIX A TPM BITLOCKER SETTINGS 1. Set up BitLocker Drive Encryption main storage. Press <Win + R> and type “Control Panel”, and then select BitLocker Drive Encryption. TPM BitLocker Settings...
  • Page 60 GOT521-RPL-WCD User’s Manual 2. Insert an external storage device, for example USB Storage. Back up BitLocker Recovery Key in a new file and save it to the USB Storage. TPM BitLocker Settings...
  • Page 61 GOT521-RPL-WCD User’s Manual 3. Please follow the steps below to encrypt your storage device: TPM BitLocker Settings...
  • Page 62 GOT521-RPL-WCD User’s Manual Now, the system prompts that the operating system drive encryption is in progress, and the encryption progress is checked. TPM BitLocker Settings...
  • Page 63 GOT521-RPL-WCD User’s Manual Select and click the icon in the lower right corner to complete the encryption. TPM BitLocker Settings...
  • Page 64 GOT521-RPL-WCD User’s Manual 4. Confirm the completion of encryption. TPM BitLocker Settings...
  • Page 65 GOT521-RPL-WCD User’s Manual 5. Disable the TPM function in BIOS Setup Utility. 6. If you see the following screen when the system is powered on, it means that the TPM module function is working fine. Note that BitLocker cannot be executed if your system does not support the TPM function.
  • Page 66 GOT521-RPL-WCD User’s Manual 【Note】 The user will experience the following situation when using a system not supporting TPM. TPM information is not found in Device Manager. When trying to turn on Bitlocker, the following error message shows up. TPM BitLocker Settings...
  • Page 67 GOT521-RPL-WCD User’s Manual TPM BitLocker Settings...

Table of Contents