Solight TE45 Manual

EN TE45
Weather station
Thank you for purchasing our equipment. Please read this manual carefully and heed the safety warnings and
instructions before installing, using or repairing the equipment. This will ensure not only the protection of persons, but
also the long life of the equipment.
D ES C R IP T IO N O F EQ U IP M EN T
B A S IC IN FO R M A T IO N
- Manual time setting
- Calendar to 2099
- Setting the date
- Temperature units in °C/°F
- Optional time display 12/24h
- Development of temperature and humidity
- Low battery indicator
- Temperature measurement
Internal temperature measurement range: -9.9°C (14.2°F) ~ 50°C (122.0°F)
Outdoor temperature measurement range: -40°C (-40°F) ~ 70°C (158°F)
- Moisture measurement
Indoor humidity measurement range: 20%RH ~ 95%RH
Outdoor humidity measurement range: 20%RH ~ 95%RH
- Maximum and minimum temperature/humidity display
- Power
Receiver: 2 x AAA/LR03
o
o Transmitter: 2 x AAA /LR06
W IR ELES S R EM O TE SE N SO R (TR A N SM IT T E R )
- Frequency 433.92 MHz
- Transmitter range: approx. 60m
FIR S T CO N SE CR A T IO N
- Do not place the wireless outdoor sensor on the ground or in direct sunlight. Do not place the sensor or weather
station in a strong electromagnetic field.
- Open the battery compartment on the back of the outdoor sensor and insert the batteries. Make sure to observe
the polarity.
After inserting the batteries, all icons on the display will briefly light up and start detecting indoor and outdoor
temperature and humidity.
- The receiver starts to establish a connection with the outdoor sensor. This operation takes about 3 minutes and is
indicated by the flashing RF antenna symbol in the OUT area of the display.
- Once the receiver establishes a connection with the outdoor sensor, it enters radio time control mode.