Solight TE84 Manual

EN WEATHER STATION Solight TE84
Operating manual
Dear Valued Customer, thank you for purchasing our product. If you wish it to serve you safely and fully, please read these instructions carefully and follow
them. This will help you avoid improper use or damage to the product. Prevent unauthorized use of this device and always follow all rules concerning the
handling of electrical appliances. Keep the operating manual for future reference. The main unit should be located as close as possible to the window.

TECHNICAL SPECIFICATIONS

Measuring room temperature
Measuring room humidity
Measuring outdoor temperature
Power supply
Accuracy of temp. measurement
Accuracy of hum. measurement
Main unit
Connect the device using a power adapter to power supply network. Open the back cover under the stand and insert 3x AAA 1.5V alkaline batteries. All LCD
segments will light up for a few seconds. You can pair the main unit with up to three sensors. Every sensor is powered by two AAA alkaline batteries. When
powered by power adapter, the weather station LCD is lit constantly. When powered by batteries, the LCD is lights up for five seconds after touching any button.
To reset the device, remove the batteries or disconnect the device from power supply for at least five seconds. This will cause all settings to be lost.
Default settings: 24-hour format, time indication 00:00, date 1 - 1 - 2004, temperature in °C
1 TOUCHSCREEEN BUTTON FUNCIONS
Function
Control
Short
push
Standard
mode
Enter the time, date
Long push and language setting
Short Switch/confirm
push
Time setting
Long push
Short
push
Alarm clock
setting
Long push

2 MAIN FUNCTIONS


Date and time (days of week

12 or 24-hour or 24-hour time format

Alarm with snooze function (5min)

Temperature measurement in °C or °F

Room temperature measurement

Room humidity measurement

Outdoor temperature measurement

4 levels of weather forecast: clear sky, scattered clouds, overcast, rain

Possible pairing of up to three wireless sensors

Indication of low batteries in the main unit and in the wireless sensor

3 DEVICE FUNCTIONS AND FEATURES

3.1 Time setting

In the current time mode, press and hold the TIME button for more than two seconds. This will bring you to the time setting mode. The active segment will start
to blink. Setting order: year - time format - hours - minutes - year - month - day - language - leave setting mode. Push UP to move one step forward; push this
button for more than two seconds to move forward at an increased speed. Push DOWN to move one step backward; push this button for more than two
seconds to move backward at an increased speed.
seconds, the values will be saved as you have set them.
0°C to + 50°C
25% to 95%
-30°C to +70°C
AC/DC power adapter 4,5V/200mA;
3x AAA 1,5V alkaline battery (main
unit)
2x AAA 1,5V alkaline battery (sensor)
1°C
5%
TIME AL
Toggling between
----
AL1 and AL2 setting
Setting the various
alarms
mode
-----
settings
----- -----
-----
Switch/confirm
----- -----
GE FR IT  DU  SP  DA  EN)
–
measuring range 0°C to +50°C, measuring accuracy +/- 1°C
–
measuring range 25% to 95%, measuring accuracy +/- 5%
–
measuring range -30°C to +70°C, measuring accuracy +/- 1°C
To confirm your setting, press the TIME button.
To ensure correct LCD light intensity, we recommend the use of alkaline
batteries with a nominal voltage of 1.5V. Rechargeable NiMH batteries
typically supply 1.2V, and the LCD light intensity is therefore worse.
DOWN CH
UP
Switching Toggling
°C/°F
AL1, AL2 between CH1,
switching
alarms on CH2 and CH3
channels
Pairing the
transmitter with
----- the receiver on
the current
channel
One step One step
-----
forward backward
Fast Fast
-----
forward backward
One step One step
-----
forward backward
Fast Fast
-----
forward backward
SNZ
Snooze function
-----
-----
-----
-----
-----
'
If you don t press any button for thirty