Solight TE81BK Operating Instructions

EN METEOROLOGICAL STATION Solight TE81BK
Operating Instructions
Dear customer, thank you for purchasing our product. If you want it to serve you safely and fully, please read these instructions carefully and follow them. This
will avoid misuse or damage. Avoid unauthorized use of this appliance and always respect all rules regarding the handling of electrical appliances. Keep the
operating instructions for future reference. The main unit should stand as close to a window as possible.
TECHNICAL DATA
Room temperature
measurement
Room humidity measurement
Outdoor temperature
measurement
Measuring outdoor humidity
Power
Temperature measurement
accuracy
Moisture measurement
accuracy
Atmospheric pressure
measurement range
Main unit
If battery powered, open the battery cover and insert two AA alkaline batteries (not included). Observe the marked polarity. On start-up, all segments of the
LCD display will momentarily light up and the instrument will beep. It will then enter standard temperature and humidity measurement mode.
If powered by an AC/DC adapter, plug the power connector into the input socket on the weather station and then plug into an electrical outlet.
To reset the device, remove the batteries or unplug the adapter for at least five seconds. This will erase all settings and memory. In the case of battery power,
the display will light up for eight seconds each time. If powered by an adapter, it will light continuously.
You can pair the main unit with up to three sensors. Each sensor is powered by two AA alkaline batteries (not included).
Default settings: 24-hour time format shows 00:00, pressure in mb/hPa and temperature in °C.
1. BUTTON FUNCTIONS
Function Control
Display
date/sec.
Short
press
Standard
mode
Enter time
HOLD setting
mode.
Short Confirm
press settings
Time
settings
HOLD -----
Short
-----
press
Setting the
alarm
HOLD -----
Short
-----
Setting the
press
temperatur
e alarm
HOLD -----
0°C to +50°C
20% to 95%
-40°C to +60°C
20% to 95%
2x AA 1.5V alkaline batteries
AC/DC adapter 5V/1200mA
1°C
5%
600 hPa/mb - 1100hPa/mb
Switching °C/°F
Wake-up
time/date
display
Enter
Activating the
alarm
RCC reception
setting
mode
mode
One step
-----
forward
----- Fast forward
One step
-----
forward
----- Fast forward
One step
-----
forward
----- Fast forward
We recommend using alkaline batteries with a nominal voltage of 1.5V for proper
LCD display brightness. NiMH rechargeable batteries are usually 1.2V and the LCD
brightness is therefore inferior.
Switching Turns the
between sensors temperatu
/cyclical sensor re alarm
display mode on/off
Enter
Activation of
temperatu
signal reception
re alarm
from sensors
setting
mode
Back one step -----
Accelerated
-----
posud back
Back one step -----
Accelerated
-----
rewind
Switching
between
max. and
Back one step
min.
temperatu
re settings
Accelerated
-----
rewind
MEM
Display of
max. and
Changing the
min.
backlight
memory
intensity
temperatu
displays
re and
humidity
Deleting
max. and
Enter change
min.
mode:
temperatu
pressure/weathe
re and
r units
humidity
data
----- -----
----- -----
----- -----
----- -----
----- -----
----- -----
on/off
Z
/ Z
Switching
on the
Switchin display
g on/off backlight
alarm /suspendi
clock ng the
wake-up
call
----- -----
----- -----
----- -----
----- -----
----- -----
----- -----
----- -----