Cisco AIR-AP1120B-A-K9 - Aironet 1100 Series Access Point Hardware Installation Manual page 96

Table C-1
Category
Radio
Power Output
Frequency
Modulation
Data rates
Cisco Aironet 1100 Series Access Point Hardware Installation Guide
C-2
Access Point Specifications (continued)
Specifications
2.4-GHz Radio
Autonomous access point:
With IEEE 802.11b-compliant radio:
100, 50, 30, 20, 5, or 1 mW (at 1, 2, 5.5, and 11Mbps)
With IEEE 802.11g-compliant radio:
100, 50, 30, 20, 10, 5, or 1 mW (at 1, 2, 5.5 and 11 Mbps)
50, 30, 20, 10, 5, or 1 mW (at 6, 9, 12, 18, 24, 48, and 54 Mbps)
Lightweight access point:
With IEEE 802.11g-compliant radio:
100, 50, 25, 12, 6, 3, 2, 1 mW (at 1, 2, 5.5 and 11 Mbps)
50, 25, 12, 6, 3, 2, 1 mW (at 6, 9, 12, 18, 24, 48, and 54 Mbps)
(Depending on the regulatory domain in which the access point is installed)
2.400 to 2.497 GHz
(Depending on the regulatory domain in which the access point is installed)
IEEE 802.11b-compliant radio:
Complementary Code Keying (CCK)
IEEE 802.11g-compliant radio:
Orthogonal Frequency Division Multiplex (OFDM)
IEEE 802.11b-compliant radio:
1, 2, 5.5, and 11 Mbps
IEEE 802.11g-compliant radio:
1, 2, 5.5, and 11 Mbps
6, 9, 12, 18, 24, 36, 48, and 54 Mbps
Appendix C Access Point Specifications
OL-4309-07