Appendix; Access Point Specifications - Cisco AIR-AP1120B-A-K9 - Aironet 1100 Series Access Point Hardware Installation Manual

Access Point Specifications

This appendix provides technical specifications for the 1100 series access point.
technical specifications for the access point.
Table C-1
Category
Physical
Size
Status Indicators
Connectors
Input Voltage
Input Power
Operating
Temperature
Storage
Temperature
Weight
OL-4309-07
Access Point Specifications
Specifications
4.1 in. W x 1.5 in. D x 8.1 in. H
10.4 cm W x 3.8 cm D x 20.6 cm H
Three indicators on the top panel:
Ethernet traffic
•
• Status
Radio traffic
•
End panel (left to right): RJ-45 connector for 10/100 BASE-T Ethernet
connections; power connector (for plug-in AC power module).
48 VDC nominal. Operational up to 60 VDC. Voltage higher than 60 VDC
can damage the unit.
With IEEE 802.11b-compliant radio:
4.75 W
With IEEE 802.11g-compliant radio:
4.75 W (typical)
o
32 to 104 F (0 to 40
o
32 to 104 F (0 to 40
o
–13 to 158 F (–25 to 70
10.5 oz (297g) with 2.4-GHz radio
Cisco Aironet 1100 Series Access Point Hardware Installation Guide
A P P E N D I X
o
C) for the access point
o
C) for the power injector
o
C) for access point
C
Table C-1 lists the
C-1