Cisco AIR-AP1120B-A-K9 - Aironet 1100 Series Access Point Hardware Installation Manual page 59

Troubleshooting Autonomous Access Points
This chapter provides troubleshooting procedures for basic problems with the 1100 series autonomous
access point. For the most up-to-date, detailed troubleshooting information, refer to the Cisco Technical
Support and Documentation website at the following URL:
http://www.cisco.com/en/US/products/hw/wireless/tsd_products_support_category_home.html
Sections in this chapter include:
Checking the Autonomous Access Point LEDs, page 5-2
•
Checking Basic Settings, page 5-4
•
Running the Carrier Busy Test, page 5-6
•
• Running the Ping or Link Test, page 5-7
Resetting to the Default Configuration, page 5-7
•
• Reloading the Access Point Image, page 5-9
Obtaining the Access Point Image File, page 5-11
•
• Obtaining the TFTP Server Software, page 5-11
OL-4309-07
C H A P T E R
Cisco Aironet 1100 Series Access Point Hardware Installation Guide
5
5-1