Wireless Settings - D-Link DAP-3520 - AirPremier N Dual Band Exterior PoE Access Point User Manual

Wireless Settings

Wireless Band:
Select either 2.4GHz or 5.0GHz from the drop-down
menu.
Mode:.
Select. Access. Point from the drop-down menu. The
other four choices are WDS.with.AP, WDS, Wireless.
Client, and.WISP.Client.Router.
Network Name (SSID):.
Service Set Identifier (SSID) is the name designated for a
specific wireless local area network (WLAN). The SSID's
factory default setting is dlink. The SSID can be easily
changed to establish a new wireless network. The SSID
can be up to 32 characters and is case sensitive.
SSID Visibility:
Select Enable to broadcast the SSID across the network,
thus making it visible to all network users. Select Disable
to hide the SSID from wireless users.
Auto Channel Selection:
Enabling this feature automatically selects the channel
that provides the best wireless performance. Enable is
set by default. The channel selection process only occurs
when the AP is booting up.
Channel:
All devices on the network must share the same channel.
To change the channel, first toggle the Auto Channel
Selection setting to Disable, and then use the drop-down
menu to make the desired selection.
Note: Wireless clients will automatically scan and match
the wireless channel of the DAP-3520.
D-Lnk DAP-3520 User Manual