Wds With Ap Mode - D-Link DAP-3520 - AirPremier N Dual Band Exterior PoE Access Point User Manual

WDS with AP mode

In WDS with AP mode, the DAP-3520 wirelessly connects multiple networks while still functioning as a wireless AP at the same time.
Wireless Band:
Select either 2.4.GHz or 5.GHz from the drop-down menu.
Mode:
WDS.with.AP mode is selected from the drop-down menu.
Network Name (SSID):
Service Set Identifier (SSID) is the name designated for a
specific wireless local area network (WLAN). The SSID's
factory default setting is dlink. The SSID can be easily changed
to connect to an existing wireless network or to establish a
new wireless network.
SSID Visibility:
Select Enable to broadcast the SSID across the network, thus
making it visible to all network users. Select Disable to hide
the SSID from wireless users.
Auto Channel Selection:
Enabling this feature automatically selects the channel that
will provide the best wireless performance. This feature is
not supported in WDS with AP mode. The channel selection
process only occurs when the AP is booting up.
Channel:
All devices on the network must share the same channel. To
change the channel, first toggle the Auto Channel Selection
setting to Disable, and then use the drop-down menu to make
the desired selection.
Note: Wireless clients will automatically scan and match the
wireless channel of the DAP-3520.
D-Lnk DAP-3520 User Manual 3