Table of Contents
Advertisement
Step 5: Once logged in, you will be able to change the Access Point's IP
address and DNS information to match your existing network configuration.
Step 6: No additional configuration is required. Within a few minutes the
Access Point will self configure and become ready to use. You have the option
of later reconfiguring your Access Point to a new static IP address using the
CloudCommand™ interface.
The DAP-3525 is PoE ( Power over Ethernet ) compliant. You can power it
either by using a PoE switch or the included power adapter. Once powered,
the green power LED will turn ON to indicate proper operation.
Power over Ethernet
DAP-3525
Internet
Switch or Router
Step 7: Restore setting change in Step 2.
7
Advertisement
Table of Contents
