Table of Contents
Advertisement
6.2 Preset Commands
The dome camera can set and perform various preset commands. The following table lists the
preset number and whether is can be set (SET) or performed (GO).
Presets 1-32 and 35-66 are user presets. Refer to your model's instructions for information on
inputting preset commands.
Preset Number
1-32 SET/GO
33 GO
34 GO
35-66 SET/GO
70 GO
71 GO
72 GO
73 GO
74 GO
75 GO
76 GO
83 SET
88 GO
89 GO
90 SET
91 SET
92 SET
93 SET
95 SET
96 GO
97 GO
98 GO
99 GO
6.3 PROGRAMMING PRESETS
Programming presets varies with the model controller being used. Several controllers are listed
below. Please refer to your model's instructions for information on inputting preset commands.
JK-UC1
Input the desired preset using the numeric keypad.
Press the SHIFT key.
The LED will light up.
Press the PRESET key.
VLC485
Input the desired preset using the numeric keypad.
Press the # key.
Press the PRESET key.
Downloaded from
www.Manualslib.com
Function
Preset position 1-32
Flip
Home (return to 0 pan position)
Preset position 35-66
Begin Auto patrol
Backlight compensation ON
Backlight compensation OFF
One push WB
One push trigger AF
Software version Display
P/T Initialize
Privacy Zone Setup menu mode
Color Mode
Monochrome Mode
Set manual left limit stop
Set manual Right limit stop
Set Scan Left Limit Stop
Set Scan Right Limit Stop
Enter Menu Mode
Stop Scan
Begin Random Scan
Begin Frame Scan
Begin Auto Scan
manuals search engine
IR Cut filter ON
IR Cut filter OFF
- 8 -
Advertisement
Table of Contents
