Toshiba DF03A - IK CCTV Camera Instruction Manual page 23

6.8.8 SCAN TILT ANGLE
The tilt angle of the dome camera for auto scan, random scan and frame scan can be set from 0 to
85 degrees or 92 degrees (0 degree is straight down).
Menu
To set SCAN TILT ANGLE:
1. Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2. Position the cursor ( ) next to PAN/TILT SETUP and press the OPEN button to access the Pan/
Tilt menu.
3. Position the cursor next to SCAN TILT ANGLE and press the OPEN button to move the cursor
to the right.
4. Move the joystick up or down to set the tilt angle.
5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE
button.
6.8.9 STOP TIME
During frame scan, random scan or auto patrol, a stop time from 1 sec to 60 sec can be set. During
scanning, the camera will not move for the specified time at each stop.
Menu
Downloaded from www.Manualslib.com
MAIN MENU
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
MAIN MENU
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
manuals search engine
PAN/TILT MENU
AUTO FLIP
PROPORTIONALP/T
SCAN LIMIT STOPS
MANUAL LIMIT STOPS OFF
PARK TIME MIN
AUTO PATROL P1 OFF
SCAN SPEED
SCAN TILT ANGLE 30DEG.
STOP TIME
MAX SPEED
PAN/TILT MENU
AUTO FLIP
PROPORTIONALP/T
SCAN LIMIT STOPS
MANUAL LIMIT STOPS OFF
PARK TIME MIN
AUTO PATROL P1 OFF
SCAN SPEED
SCAN TILT ANGLE 30DEG.
STOP TIME
MAX SPEED
- 23 -
ON
ON
OFF
0MIN
5DEG./S
10SEC
400DEG/S
ON
ON
OFF
0MIN
5DEG./S
10SEC
400DEG/S