Page 3
Revolutions per minute 1.4 Product information Hilti products are designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any particular hazards that may be encountered. The product and its ancillary equipment can present hazards if used incorrectly by untrained personnel or if used not in accordance with the intended use.
Page 4
▶ Write down the serial number in the table below. You will be required to state the product details when contacting Hilti Service or your local Hilti organization to inquire about the product. Product information Type SIW 22T-A "| SIW 22T-A Generation: Serial no.:...
Page 5
▶ If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. Power tool use and care ▶ Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
Page 6
▶ If the battery is too hot to touch, it may be defective. In this case, place the power tool in a non-flammable location, well away from flammable materials, where it can be kept under observation and left to cool down. Contact Hilti Service after the battery has cooled down. English...
Page 9
3 Description 3.1 Overview of the product English Printed: 06.06.2017 | Doc-Nr: PUB / 5136064 / 000 / 04...
Page 10
Impact screwdriver/wrench, operating instructions. Note To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by us for use with the product can be found at your local Hilti Center or online at: www.hilti.group 4 Technical data SIW 22TA...
Vibration values SIW 22TA SIW 22TA Vibration emission value when tightening screws/bolts 14.5 m/s² 14.2 m/s² and nuts of the maximum permitted size Uncertainty for tightening screws/bolts and nuts of the 1.5 m/s² 1.5 m/s² maximum permitted size 5 Operation 5.1 Fitting the belt hook (optional) WARNING Risk of injury! Hazard presented by a falling power tool.
Page 12
▶ Set the forward / reverse selector switch to forward or reverse rotation. 5.3 Fitting the socket SIW 22T-A " CAUTION Risk of injury through use of the wrong type of accessory tool! ▶ Use only accessory tools of the locking type.
Page 13
6. Insert the locking pin in the socket. 7. Fit the O-ring on the socket. 5.5 Removing the socket SIW 22T-A " 1. Set the forward/reverse switch to the middle position or remove the battery from the power tool. 2. Pull the accessory tool off the square drive.
Page 14
• Do not operate the cordless tool if signs of damage are found or if parts malfunction. Have the tool repaired by Hilti Service immediately. • After cleaning and maintenance, fit all guards or protective devices and check that they function correctly.
8 Troubleshooting If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem by yourself, please contact Hilti Service. 8.1 Troubleshooting If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem by yourself, please contact Hilti Service.
Page 16
▶ Disposal of electric tools or appliances together with household waste is not permissible. 10 China RoHS (guideline on restriction of the use of dangerous substances) The following links take you to the table of dangerous substances: qr.hilti.com/r4265 ( SIW 22T-A 1/2" ) and qr.hilti.com/r2922676 (SIW 22T-A 3/4").
Need help?
Do you have a question about the SIW 22T-A and is the answer not in the manual?
Questions and answers