System Connection; Outputting To A Video Monitor; To Control By A Computer - Canon 450X - RE Document Camera Instruction Manual

4

SYSTEM CONNECTION

The following equipment can be connected to the input and output terminals. Use the included power cord.
For cables other than the power cord and the RGB cable, use commercially available cables. For details of
operation, refer to the instruction manual of the equipment to be used.
Output Equipment
Liquid-crystal
projector
To RGB input terminal
RGB cable
When connecting to equipment such as a video monitor or a
NOTICE
VCR, check if your RE-450X model uses NTSC or PAL
format, and use equipment compatible with the appropriate
format.
15
Video monitor
RGB monitor
RGB projector
To S-video input terminal or video input terminal
Video
cable
VIDEO S VIDEO
OUT OUT
RGB IN RGB OUT
VCR
Video camera,
speakers with an
amplifier, etc.
S-video cable
Rear panel
RS-232C
AC INLET
Computer
To control certain functions of the RE-450X by a computer,
complete the following steps:
Connect the RE-450X to the computer using a RS-232C
cable.
Turn ON the power to the equipment.
Operate the computer.
For details, please consult your dealer.
Outputting to a video
monitor
To output to a video monitor,
connect the RE-450X to a
monitor's video input terminal
using a commercially available
video cable. The video monitor
projects images from the camera
head, regardless of the selected
input equipment.
When using video
output and S-video
output, dark areas
may appear on the
periphery of the
screen.
To AC
power outlet
Power cord

To control by a computer