Table of Contents
Advertisement
Appendix
Session-at-Once (SAO)
As a writing method that combines the advantages of the above-mentioned "Disc-
at-Once" and "Track-at-Once," you can combine multiple tracks into one session
and write them, and then add additional data.
For example, this is the writing method used to create a CD EXTRA format CD.
The music tracks will be recorded in the first session, and the data will be
recorded in the second session.
Example: CD EXTRA
0
Audio
Audio
Track 1
Track 2
Session 1
Lead-in
Packet Writing
This mode is used when writing to a track of a disc using small blocks of data
called "packets," in a manner similar to a floppy disk. This mode is useful when
making small incremental backups of data. You will need to use software that
specifically supports packet writing, such as Adaptec' s Direct CD.
1
2
3
4
Packet
n Discs must be formatted before they can be used for packet writing. With CD-RW,
erased data can be overwritten until the disc is completely full.
With CD-R, the space used by the erased data cannot be reused and is "masked" so that
it is no longer visible. This can be done up to 100 times.
37
Audio
Track 3
Lead-out
/Lead-in
.
.
5
6
7
8
Data
Track 4
Session 2
Lead-out
.
.
.
.
.
.
Same as writing to floppy or hard disk
650MB
.
.
.
.
Advertisement
Table of Contents
