Rear Panel - Teac CDW54E User Manual

4.2 Rear panel

Digital
Audio
output
Analog Audio output connector
For stereo audio signal output.
When driving external speakers, connect this connector to the audio
input connector on the Sound Card or Interface Card.
Note:
Mating connectors: Molex 53103-0450 or equivalent.
Connector No.
Interface connector
Connect to the IDE interface card using the 40-pin flat cable.
Cable-side mating connectors: 5320-40AGS1 Molex, or equivalent.
4. Controls and Functions
Strap switch
Analog audio output connector
1 L ch Signal
2 L ch Ground
3 R ch Ground
4 R ch Signal
Interface
Connector
Audio signal
Frame ground
tapped hole
M3
Power
connector
33