Download
Share
Print this page
Texas Instruments DS90Ux947-Q1EVM User Manual
  1. Manuals
  2. Brands
  3. Texas Instruments Manuals
  4. Computer Hardware
  5. DS90Ux947-Q1EVM
  6. User manual
Texas Instruments DS90Ux947-Q1EVM User Manual

Texas Instruments DS90Ux947-Q1EVM User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
DS90Ux947-Q1EVM User's Guide
User's Guide
Literature Number: SNLU140A
November 2014 – Revised August 2015

Advertisement

loading
Need help?

Need help?

Do you have a question about the DS90Ux947-Q1EVM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Texas Instruments DS90Ux947-Q1EVM

Summary of Contents for Texas Instruments DS90Ux947-Q1EVM

  • Page 1 DS90Ux947-Q1EVM User's Guide User's Guide Literature Number: SNLU140A November 2014 – Revised August 2015...
  • Page 2 ....................1.14 Equipment References ......................1.15 Cable References ........................Bill of Materials ......................EVM PCB Schematics ........................Board Layout .......................... Revision History Contents SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 3 ....................1-20. ALP Preferences Menu ................1-21. Typical Test Setup for Video Application ..................1-22. Typical Test Setup for Evaluation SNLU140A – November 2014 – Revised August 2015 List of Figures Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 4 ..............1-13. Configuration Select (MODE_SEL1) - SW-DIP8 - S6 ......................1-14. IDx SW-DIP8 - S3 ......................2-1. Bill of Materials List of Tables SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 5 DS90Ux947-Q1EVM User's Guide General Description The DS90Ux947-Q1EVM (Evaluation Module) converts OpenLDI to FPD-Link III. This kit will demonstrate the functionality and operation of the DS90Ux947-Q1. The DS90Ux947-Q1 is an OpenLDI to FPD-Link III Serializer which, in conjunction with the DS90Ux940-Q1/DS90Ux948-Q1 Deserializers, takes the data from OpenLDI serial stream and translates it into either single- or dual-lane FPD-Link III interface.
  • Page 6 D5+/- D5+/- D6+/- D6+/- D7+/- D_GPIO D_GPIO D7+/- (SPI) (SPI) HDCP ± High-Bandwidth Digital Content Protection Figure 1-1. Applications Diagram DS90Ux947-Q1EVM User's Guide SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 7 Deserializer (I2C) Figure 1-2. Typical Configuration Figure 1-1 Figure 1-2 illustrate the use of the chipset in a display application. SNLU140A – November 2014 – Revised August 2015 DS90Ux947-Q1EVM User's Guide Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 8 5. Connect J29 with miniUSB (5-pin_ to USB A (4-pin) cable to PC USB port For details of pin-names and pin-functions, please refer to the DS90Ux947Q datasheet. DS90Ux947-Q1EVM User's Guide SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 9 Connect to PC for I2C register access APPLY HERE MODE_SEL Apply OLDI & Inputs Settings EVEN MODE_SEL1 SV601153 Figure 1-3. Interfacing to the EVM SNLU140A – November 2014 – Revised August 2015 DS90Ux947-Q1EVM User's Guide Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 10 1 to 3 ON 1 ON, 2-8 OFF 1 ON, 2-8 OFF 1 ON, 2-8 OFF 1-2 OFF, 3-4 ON DS90Ux947-Q1EVM User's Guide SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 11 J43.2 OpenLDI D4 input J43.3 J43.6 OpenLDI D5 input J43.7 J43.10 OpenLDI D6 input J43.11 J43.18 OpenLDI D7 input J43.19 SNLU140A – November 2014 – Revised August 2015 DS90Ux947-Q1EVM User's Guide Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 12 Enable. Disable repeater mode. REPEATER: Configure Repeater Enable repeater mode. OpenLDI bit mapping. MAPSEL: OpenLDI Bit Mapping SPWG bit mapping. DS90Ux947-Q1EVM User's Guide SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 13 S1.1 (Default) 0x0C 0x18 S1.2 0x0E 0x1C S1.3 0x10 0x20 S1.4 0x12 0x24 S1.5 0x14 0x28 Only set one high. SNLU140A – November 2014 – Revised August 2015 DS90Ux947-Q1EVM User's Guide Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 14 Table 1-14. IDx SW-DIP8 - S3 (continued) Designator 7-Bit Address 8-Bit Address S1.6 0x16 0x2C S1.7 0x18 0x30 S1.8 0x1A 0x34 DS90Ux947-Q1EVM User's Guide SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 15 Make sure all the software has been installed and the hardware is powered on and connected to the PC. Execute “Analog LaunchPAD” shortcut from the start menu. The default start menu location is under All Programs > Texas Instruments > Analog LaunchPAD vx.x.x > Analog LaunchPAD to start MainGUI.exe. SNLU140A – November 2014 – Revised August 2015...
  • Page 16 Under the Devices tab click on “DS90Ux947” to select the device and open up the device profile and its associated tabs. Figure 1-5. Initial ALP Screen After selecting the DS90Ux947, the following screen should appear. DS90Ux947-Q1EVM User's Guide SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 17 1.11.6 Information Tab The Information tab is shown below. Please note the device revision could be different. Figure 1-7. ALP Information Tab SNLU140A – November 2014 – Revised August 2015 DS90Ux947-Q1EVM User's Guide Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 18 ALP Software Setup www.ti.com 1.11.7 Pattern Generator Tab The SER Pattern Generator tab is shown below. Figure 1-8. ALP Pattern Generator Tab DS90Ux947-Q1EVM User's Guide SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 19 ALP Software Setup www.ti.com 1.11.8 Registers Tab The Register tab is shown below. Figure 1-9. ALP Registers Tab SNLU140A – November 2014 – Revised August 2015 DS90Ux947-Q1EVM User's Guide Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 20 Address 0x00 selected as shown below. Note that the “Value:” box, , will now show the hex value of that register. Figure 1-10. ALP Device ID Selected DS90Ux947-Q1EVM User's Guide SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 21 “refresh” to see the new value of the selected (highlighted) register. The box toggles on every mouse click. SNLU140A – November 2014 – Revised August 2015 DS90Ux947-Q1EVM User's Guide Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 22 ALP Framework application. DS90Ux947-Q1EVM User's Guide SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 23 Figure 1-14. Remove Incorrect Profile Find the correct profile under the Select a Daughter Board list, highlight the profile and press Add. SNLU140A – November 2014 – Revised August 2015 DS90Ux947-Q1EVM User's Guide Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 24 Figure 1-15. Add Correct Profile Select Ok and the correct profile should now be loaded. Figure 1-16. Finish Setup DS90Ux947-Q1EVM User's Guide SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 25 When the ALP is operating in demo mode there is a “(Demo Mode)” indication in the lower left of the application status bar as shown below. SNLU140A – November 2014 – Revised August 2015 DS90Ux947-Q1EVM User's Guide Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 26 After demo mode is disabled, the ALP software will poll the ALP hardware. The ALP software will update and have only “DS90Ux947” under the “Devices” pull down menu. DS90Ux947-Q1EVM User's Guide SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 27 FPD-Link III Digital Video Source Logic Analyzer / Oscilloscope Contents of Demo Kit Figure 1-22. Typical Test Setup for Evaluation SNLU140A – November 2014 – Revised August 2015 DS90Ux947-Q1EVM User's Guide Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 28 24 AWG (or larger diameter) cable for high-speed data applications. Leoni Dacar 538 series cable: www.leoni-automotive-cables.com Rosenberger HSD connector: www.rosenberger.de/en/Products/35_Automotive_HSD.php DS90Ux947-Q1EVM User's Guide SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 29 X5R, 0402 CAP, TA, 2.2uF, 25V, +/-10%, 3.8 Vishay-Sprague 293D225X9025B2TE3 ohm, SMD CAP, CERM, 0.01uF, 100V, +/- 08051C103KAT2A 10%, X7R, 0805 SNLU140A – November 2014 – Revised August 2015 Bill of Materials Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 30 H1, H2, H5, H6, H9, H11 Standoff, Hex, 0.5"L #4-40 Nylon Keystone 1902C Connector, Audio Jack, 3.5mm, CUI Inc. SJ-3523-SMT Stereo, SMD Bill of Materials SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 31 Header, TH, 100mil, 10x2, Gold Samtec TSW-110-07-G-D plated, 230 mil above insulator J17, J52 RIGHT ANGLE PLUG FOR PCB Rosenberger 59S20X-400L5-Y SNLU140A – November 2014 – Revised August 2015 Bill of Materials Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 32 R113, R126, R127, R131, R134, R135, R136, R137, R138, R139, R140, R141, R143, R144, R145, R146, R147, R163, R198, R203, R206 Bill of Materials SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 33 Vishay-Dale CRCW040235K7FKED RES, 71.5 k, 1%, 0.063 W, 0402 Vishay-Dale CRCW040271K5FKED RES, 137 k, 1%, 0.063 W, 0402 Vishay-Dale CRCW0402137KFKED SNLU140A – November 2014 – Revised August 2015 Bill of Materials Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 34 IC, Automotive LDO Positive Texas Instruments TL751M05QKVURQ1 Voltage Regulators, 5V 4-channel ESD-Protection Array Texas Instruments TPD4E004DRY For high-speed Data Interfaces, DRY006A Bill of Materials SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 35 PART NUMBER QUANTI Mixed Signal MicroController, Texas Instruments MSP430F5529IPN PN0080A TCA9406 Dual Bidirectional 1-MHz Texas Instruments TCA9406DCUR I2C-BUS and SMBus Voltage Level-Translator, 1.65 to 3.6 V, -40 to 85 degC, 8-pin US8 (DCU), Green (RoHS & no Sb/Br) IC, 6-BIT Bidirectional Voltage-...
  • Page 36 Not in version control Assembly Variant: Sheet: warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its Drawn By: Ryan Bailey File: SV601153A_Cover Sheet_Block.SchDoc...
  • Page 37 Not in version control Assembly Variant: Sheet: warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its Drawn By: Ryan Bailey File: SV601153A_Cover Sheet_ANSI-B.SchDoc...
  • Page 38 Not in version control Assembly Variant: Sheet: warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its Drawn By: Downs File: SV601153A_MSP430F5529.SchDoc...
  • Page 39 Not in version control Assembly Variant: Sheet: warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its Drawn By: File: SV601153A_DS90Ux947.SchDoc...
  • Page 40 Not in version control Assembly Variant: Sheet: warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its Drawn By: File: SV601153A_CONFIG.SchDoc...
  • Page 41 Not in version control Assembly Variant: Sheet: warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its Drawn By: File: SV601153A_CONNECTORS.SchDoc...
  • Page 42 Not in version control Assembly Variant: Sheet: warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its Drawn By: File: SV601153A_LED.SchDoc...
  • Page 43 Not in version control Assembly Variant: Sheet: warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its Drawn By: File: SV601153A_Power.SchDoc...
  • Page 44 Not in version control Assembly Variant: Sheet: warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its Drawn By: File: SV601153A_Audio_IF.SchDoc...
  • Page 45 Appendix B SNLU140A – November 2014 – Revised August 2015 Board Layout SNLU140A – November 2014 – Revised August 2015 EVM PCB Schematics Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 46 Appendix B www.ti.com Board Layout SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 47 Appendix B www.ti.com SNLU140A – November 2014 – Revised August 2015 Board Layout Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 48 Appendix B www.ti.com Board Layout SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 49 Appendix B www.ti.com SNLU140A – November 2014 – Revised August 2015 Board Layout Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 50 Appendix B www.ti.com Board Layout SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 51 Appendix B www.ti.com SNLU140A – November 2014 – Revised August 2015 Board Layout Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 52 Appendix B www.ti.com Board Layout SNLU140A – November 2014 – Revised August 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 53 Appendix B www.ti.com SNLU140A – November 2014 – Revised August 2015 Board Layout Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
  • Page 54 Revision History www.ti.com Revision History Changes from Original (November 2014) to A Revision ....................Page ................. • Changed Title to DS90Ux947-Q1EVM User's Guide ..............• Changed DS90UB or DS90UH to DS90ux throughout document......................• Changed rows in Table 2-1 NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
  • Page 55 STANDARD TERMS AND CONDITIONS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, or documentation (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms and conditions set forth herein. Acceptance of the EVM is expressly subject to the following terms and conditions.
  • Page 56 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 57 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧くださ い。http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page SPACER EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS.
  • Page 58 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2015, Texas Instruments Incorporated...
  • Page 59 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue.
  • Page 60 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments DS90UB947-Q1EVM...