Connecting An External Decoder Box (2) - Pioneer DVR530 Operating Instructions Manual

02 Connecting up

Connecting an external decoder box (2)

If you only have a decoder, connect it to this recorder and your TV as shown on this page.
Using the setup on this page you can:
• Record scrambled channels received using the recorder's built-in TV tuner.
Important
• Do not connect this recorder 'through' your VCR, satellite receiver or cable box. Always connect each component
directly to your TV or AV amplifier/receiver.
SCART AV
CONNECTOR
2
AC IN
Note
1 In order to use this setup, you will need to make the following settings from the Initial Setup menu:
• Set the AV2/L1 In setting to Decoder from the Initial Setup menu (see AV2/L1 In on page 102).
• From the Manual CH Setting screen, set the Decoder setting for the scrambled channels to On (see Manual CH Setting on page 101).
18
En
ANTENNA
IN
TV 1
COMPONENT VIDEO OUT
Y P
B
IN
AV 2 (INPUT 1/DECODER) AV 1 (RGB) – TV
G-LINK CONTROL DIGITAL R L R L
OUT
OPTICAL
P
IN R
AUDIO VIDEO AUDIO VIDEO
S-VIDEO S-VIDEO
INPUT 3 OUTPUT
ANTENNA
IN (RF IN)
1
3
SCART AV
CONNECTOR
Antenna/cable TV
Decoder wall outlet
1 Connect RF antenna cables as shown.
This enables you to watch and record TV channels.
2 Use a SCART cable (not supplied) to connect the
AV1(RGB)-TV AV connector to a SCART AV connector
on your TV.
This enables you to watch discs.
3 Use another SCART cable to connect the
AV2(INPUT 1/DECODER) AV connector to a SCART AV
ANTENNA
OUT
connector on your decoder box.
This enables you to record scrambled TV channels.
OUT
ANTENNA
1