Setting Up The Guide Plus+™ System; Other Settings You Can Make - Pioneer DVR530 Operating Instructions Manual

Getting started
Use the buttons to move from one field to
another.
• You can go back to the previous screen at anytime in
the Setup Navigator by pressing RETURN.
7 Select the TV screen type, 'Wide (16:9)' or
'Standard (4:3)'.
Initial Setup
Basic Clock Setting TV Screen Size
Basic
Tuner Input Line System
Video In/Out Power Save
Audio In Help
Audio Out Setup Navigator Setup Navigator
Language
Recording
Playback
Use the buttons to select, then press ENTER.
8 Is your TV compatible with progressive scan
video?
Initial Setup
Basic Clock Setting Progressive
Basic
Tuner Input Line System
Video In/Out Power Save
Audio In Help
Audio Out Setup Navigator Setup Navigator
Language
Recording
Playback
Use the buttons to select Compatible, Not
Compatible, or Don't Know, then press ENTER.
• Note that progressive scan video is only output
through the AV1(RGB)-TV connector and the
component video outputs.
9 Press ENTER to exit the Setup Navigator, or select
'Go Back' if you want to start again.
Initial Setup
Basic Clock Setting
Basic
Tuner Input Line System Setu p is complete!
Video In/Out Power Save E nj o y using your DVD recorder!
Audio In Help
Audio Out Setup Navigator Setup Navigator
Language
Recording
Playback
That completes basic setup using the Setup Navigator.

Other settings you can make

After setting up using the Setup Navigator, you should be
ready to start enjoying your DVD recorder. It's possible,
however, that you may want to make a couple of
additional settings, depending on how the recorder is set
up for terrestrial TV broadcasts.
Wide (16:9)
Standard (4:3)
Compatible
Not Compatible Not Compatible
Don't Know
Fi nish Setup Finish Setup
Go Back
• Manual channel setting – This setting lets you skip
channels where there is no station, as well as
manually tune to stations. See Manual CH Setting on
page 101.
• Setting up the remote to control your TV – You can set
up the supplied remote control to control many
brands of TV. See Setting up the remote to control your
TV on page 109.
• If for any reason you need to cancel the setup process
before it's completed, you will be asked the next time
you switch on whether you want to start setting up
again, or whether to leave it until later.
Setting up the GUIDE Plus+™ system
The GUIDE Plus+™ system is a free, interactive on-
screen television programming guide. The system offers
program listings for all major channels, one-touch
recording, search by genre, recommendations according
to your profile and more.
For the GUIDE Plus+ system to function correctly, it is
important that you set the language and country
correctly in the Setup Navigator, and that you have
performed a scan for available channels, as these are all
used by the GUIDE Plus+ system. If any of these things
are not yet set, please run the Setup Navigator first (see
Switching on and setting up on page 25).
TV listings information is received via 'host channels'. In
order to receive the correct TV listings information for
your country or region you need to set up the GUIDE
Plus+ system and 'download' the TV listings information.
The initial download can take up to 24 hours, but once
this is done, all future updates are automatic.
ENTER
04
27
En