Pioneer DVR530 Operating Instructions Manual page 45

Using the GUIDE Plus+™ electronic program guide
Setting a ShowView™* recording
1 Select 'Schedule' from the Menu bar.
2 Press the RED Action button (ShowView).
3 Use the number buttons to enter a ShowView
programming number.
• If you live in an area not yet covered by GUIDE Plus+
you may also have to input a channel number. Follow
the on-screen display to do this.
4 Press to confirm.
ENTER
*
® is a trademark of Gemstar Development
Corporation.
The ShowView system is manufactured under license from
Gemstar Development Corporation.
Setting a manual recording
1 Select 'Schedule' from the Menu bar.
2 Press the GREEN Action button (Manual).
3 Use the number and
the recording date, then press the GREEN Action
button (Next).
4 In the same way, enter the recording start time,
followed by the GREEN Action button (Next) to
confirm.
5 Enter the recording end time in the same way,
followed by the GREEN Action button (Next) to
confirm.
05
buttons to enter
45
En