Pioneer DVR530 Operating Instructions Manual page 28

04 Getting started
1 Press GUIDE to display the GUIDE Plus+ setup
menu.
The language and country settings are already set to
whatever you selected in the Setup Navigator.
2 Use the
3 Use the number and cursor buttons to enter your
postal code.
The system uses your postal code to identify which TV
listings data is correct for the area in which you live, so it
is important that you enter it correctly.
28
En
buttons to select Postal Code.
4 If you are using an external receiver (such as a
satellite receiver) with the supplied G-LINK cable,
complete this step, otherwise jump to step 5 below.
• See Connecting to a cable box, satellite receiver or
digital terrestrial receiver on page 16 for more on using
the supplied G-LINK cable.
• Select External Receiver 1, 2 or 3, then press
ENTER. (If you have just one external receiver, use
External Receiver 1. You can add further receivers in
2 and 3 if you need to.)
After pressing ENTER:
• Select your reception method (Terrestrial, Cable or
Satellite).
• Select your provider (if applicable).
• Select the brand of your external receiver.
• Identify which input your external receiver is
connected to.
After completing these steps the recorder will try and
communicate with your external receiver and change the
channel via the G-LINK cable. If the channel was
successfully changed, select Yes to confirm.
If the channel did not change, select No. The GUIDE
Plus+ system will try other codes assigned to your
external receiver. If none of the codes changes the
channel successfully, tune your external receiver to the
host channel for your country (refer to step 5 below) and
leave it on overnight. The recorder needs to be in standby.
It will wake up automatically and download new codes
from the host channel. The next day, try this setup
process again:
• Press GUIDE to display the GUIDE Plus+ setup
menu.
• Press to highlight the Menu bar, then use
reach the Setup area and select Setup.
• Continue setting up from the start of this step again.
If your external receiver still doesn't respond to the
G-LINK controller, please call customer support and
report the brand and model of your external receiver.
to