DISK DRIVE
SurePOS 500 supports industry standard 3.5-inch form factor hard disk drives with AT interface. The
maximum thickness supported is 25.4 mm.
Formatted Capacity (GB)
Interface
Rotational Speed
Buffer Size
Performance
Seek Time (ms)
Track to Track (ms)
Latency (ms)
Transfer Rates (Mbytes/sec)
Power Consumption
Read/Write on Track
Chapter 8 POS I/O Specifications
MSR
SurePOS 500-XX3 supports two msr types: 3-Track and JUCC. The SurePOS 500-XX3 3-Track MSR
features enhanced configuration options over the predecessor models to improve compatibility with existing
business partner applications. The enhancements include
Enable/Disable Carriage Return
Enable/Disable Sentinals
Programmable Sentinels
Individually selectable Tracks
FLASH firmware
Compatibility mode w/ previous generation
The MSR will support mini-cards as well as metalized cards.
Track Configuration
Coercivity of Magnetic Stripe
Read Direction
Swipe Speed
Maximum Jitter
Error Rate
Electrical Interface
Rated Life
Note
1. The interface is set by customer using switch before installation. Default is RS232.
SurePOS 500 Model XX3 Technical Reference, v 1.3
40.2 GB
IDE (AT)
5400 rpm or 7200 rpm
512 KB
<10 typ
2
6.81
UltraDMA: 100
PIO: 16.6
5 W
3-Track MSR Option
ISO 7811 Tracks 1,2,3
300 to 4000 Oe
Bi-directional
5 to 60 inches per second
12%
Less than 0.5%
Serial or PS/2 Keyboard
(note 1)
500,000 swipes
81
JUCC Option
JIS II, ISO Track 2
300 to 4000 Oe
Unidirectional
5 to 60 inches per second
12%
Less than 0.5%
Serial
500,000 swipes
Page 27 of