APA 29640 Manual

PROPER USE OF THE PRODUCT

The tow bar ‚snap-in' is to be used exclusively for the towing of broken-down vehicles which are equipped with suitable towing lugs. Check the operating instructions of the vehicles be towed! The towing equipment used by the towing vehicle and the vehicle being towed must be at about the same height.
Any other use is not permitted.
This device is not intended to be used by children and persons with limited mental abilities or without the experience required to operate the device. Keep children away from the device.
The device is not designated for commercial use.
Intended use also includes observation of all information in this manual, in particular the safety instruction. Any other use is considered to be improper and may result in damage or injury. The EAL GmbH assumes no liability for damages caused by improper use.

SCOPE OF DELIVERY

2 x Tow hook (pre-assembled on the tow rod)
2 x Tow rod
1 x Centre piec
1 x Pair of gloves e
1 x Transport bag
1 x Operating instructions

SPECIFICATIONS

Length: approx. 1,80 m
Weight: approx. 4,4 kg
max. total weight of the vehicle being towed: 2500 kg
Attachment: on serial towing lugs in accordance with the manufacturer's instructions

OPERATING INSTRUCTIONS

Figure 1: Connecting the vehicles

Connecting the vehicles

Position the towing vehicle approx. 1.5 m in front of the vehicle being towed. Secure both vehicles from rolling away. There is a risk of getting crushed between the two vehicles. To ensure that the tow bar is predominantly stressed from a longitudinal direction when later accelerating and braking, drive the vehicles in such a way that the tow bar is straight and not in a diagonal position when the towing lugs are opposite each another. It may be necessary to drive the vehicles in offset alignment. The towing lugs of the vehicles may have to be prepared if necessary before the tow bar can be attached. Refer to the operating instructions of the vehicle manufacturer.
Now open the tow hooks ①. Press both of the bolts ② down until the tow hook can be moved. If necessary you can completely remove the towing hook from the tow bar ③ in order to attach it to the towing lug of the vehicle being towed. Make sure that the tow hook is inserted from above into the towing lug and that it fits tightly. Push the tow hook back into its original position. Make sure that the bolts latch back into place properly. Proceed in the same manner with the second tow hook ④ and the second tow bar ⑦ on the vehicle being towed. Push the bolts ⑥ downward and place the centre piece ⑤ on to the first tow bar ③. Push the bolts ⑥ down again and slide the tow bar approx. 15 cm further together. Now connect the open end of the centre piece ⑦ to the second tow bar. Slide the centre piece over the tow bar until the bolts ⑧ latch in place. Now drive the towing vehicle forward slowly and carefully until the tow bar is pulled apart and the bolts ⑥ latch into place. Then stop again and make sure the tow bar is in the correct position. Also make sure that all bolts ②⑥⑧⑨ have latched correctly into place.
The tow bar is now ready to be used.

Observe the safety guidelines when towing!

Separating the vehicles

First, secure both vehicles from rolling away. Now the tow hooks ① and ④ can be disconnected from the towing lugs. For this purpose press the bolts ② inward and release the tow hook ① by sliding on the tow bar ③from the towing lug. It may also be necessary to disconnect the tow bar ③ from the centre piece ⑤. For this purpose press the bolts ⑥ inward and slide the centre piece ⑤ correspondingly. Proceed in the same manner on the other end of the tow bar.
Place all parts of the tow bar into the transport bag after completing the towing process.

MAINTENANCE AND CARE

Clean the tow bar with a slightly damp cloth and a mild detergent. Do not use harsh detergents, solvents or gasoline. Make sure that no detergents or liquids are allowed penetrate into the tow bar.
Treat the bolts regularly with a light penetrating oil.
Store the tow bar in a dry place.

CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany

+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160

info@eal-vertrieb.com
www.eal-vertrieb.com

SAFETY GUIDELINES

• These operating instructions are part of the product and must be read carefully before using the tow bar.
• All safety regulations must always be adhered to. The operating instructions must be kept for the life of the product and given to each subsequent user or owner of the product.
• The parts of the vehicles to which the tow bar is to be attached during the towing operation must be sufficiently strong.
• This tow bar is only suitable for vehicles which are fitted as standard with towing devices at the same height, i.e. at the same distance from the ground.
• This tow bar is only suitable for vehicles which are fitted as standard with towing devices at the same height, i.e. at the same distance from the ground.
• Therefore the tow bar must run parallel along the longitudinal axis of the vehicle or in a straight line with the direction the vehicle is being towed. Therefore it may be necessary to drive in offset alignment.
• Visibility between the two vehicles must ensure that the rear/brake lights of the towing vehicle can be seen from the vehicle being towed.
• Before the tow bar is assembled or mounted you must first warn other drivers that a vehicle has broken-down! Don't forget your own safety either. Put on a safety vests and place at least one warning triangle behind the broken-down vehicle at a distance of 100 to 400 meters, depending on the road traffic regulations of the country you are in.
• Secure both vehicles from rolling before attaching the tow bar. There is a risk of getting crushed between the two vehicles.
• Always turn on the hazard lights of both vehicles!
• The steering lock and the ignition of the vehicle to be towed must be unlocked during towing! Do not remove the ignition key under any circumstances! There is a risk that steering may me blocked!
• The towing vehicle may not be lighter than the vehicle being towed vehicle, otherwise driving characteristics will be impaired.
• Never exceed the maximum permissible weight of 2,500 kg for the vehicle being towed!
• The towing of vehicles with defective brakes is prohibited!
• The operating instructions of the vehicle manufacturer must be observed. Consult the vehicle operating instructions or a specialist workshop to find out whether the towing eyes are suitable for the use of a tow bar.
• Tow lugs and tow bar may only be used when in perfect operating condition!
• The play between tow lug and the tow hook on the tow bar should be as low as possible.
• When towing a vehicle with an automatic transmission closely follow the operating instructions of the vehicle being towed!
• The driving style must always be adapted to the prevailing traffic conditions.
• When starting off, accelerating, braking and cornering, drive carefully and carefully. Towing may only be carried out at low speed. For safety reasons, do not drive faster than 50 km/h! The tow bar and the towing lugs cannot absorb the forces arising in the event of emergency braking.
• Road Traffic Act [StVO] regulations must be observed during towing. Always observe the existing traffic laws of the country in which you are towing. If you still have questions please contact the nearest police station!
• Safe operation is no longer possible if the tow bar is visibly damaged. The tow bar may no longer be used. Never attempt to repair a tow bar that is damaged!