Summary of Contents for Richmar inTENSity IF Combo II
Page 1
IF Combo II PAGE 1 QUICK REFERENCE GUIDE The purpose of this guide is to assist you in correctly operating your InTENSity™ IF Combo II TENS/IF unit. This device should only be used under the continued supervision of a licensed healthcare professional. This guide is not intended to replace or substitute the InTENSity™...
Page 2
IF Combo II PAGE 2 QUICK REFERENCE GUIDE NEVER REMOVE THE SELF-ADHESIVE ELECTRODES FROM THE SKIN WHILE THE DEVICE IS TURNED ON! WARNING: Device will not work while charging. Device is partially charged upon receipt. If the electrodes are not placed firmly on the skin or the device has not connected with the lead wires securely, and the output intensity IMPORTANT! level is equal or greater than 10mA, the intensity will stop automatically.
Page 3
IF Combo II PAGE 3 QUICK REFERENCE GUIDE PULSE WIDTH AND START TIME TENS — SET PRESET PROGRAMS — P1 & P2 Pulse Width Press [S] button to enter the pulse width and Select Treatment Mode the “µs” will flash. Press [+] or [-] button to Press [ M/ ] button to select the TENS adjust the pulse width.
Need help?
Do you have a question about the inTENSity IF Combo II and is the answer not in the manual?
Questions and answers