On-Screen Status Displays - Magnavox MC13D1MG99 - Tv/vcr Combination - Mono User Manual

MC13D1MG 3/22/02 1:26 PM

20 On-Screen Status Displays

To check the Counter, Clock, and Channel number on the TV screen, press DISPLAY on the remote control.
Each time you press DISPLAY, the TV screen will change as described below.
When Closed Captions are OFF (details are on page 35)
Counter mode: After five seconds, only the counter remains. To clear it, press DISPLAY.
Clock mode: After five seconds, only the clock and channel number remain. To clear them, press DISPLAY.
<Off mode>
When Closed Captions are ON (details are on page 35)
The On Screen Display disappears after five seconds. This is true even if you press MUTE or press
PAUSE/STILL while recording.
Page 20
<Counter mode>
Press
DISPLAY
once
Press DISPLAY once
<Off mode>
Press DISPLAY once
Press
DISPLAY
once
COUNT 0:12:34
<Clock/Counter mode>
STOP
SP COUNT 0:12:34
<Clock mode>
5:40PM
CH2
5:40PM
CH2