Table of Contents
Advertisement
MC13D1MG
3/22/02
1:26 PM
40 Wake Up Timer
The Wake Up Timer turns on the TV/VCR automatically at
a specified time within the next 24 hours. You may set the
TV/VCR to turn on at a TV channel or with VCR playback.
To set the Wake Up Timer, follow the steps below.
Before you begin:
Set the clock. Details are on pages 12-15. If the clock is not
set, you will not be able to set the Wake Up Timer.
Put a tape in the TV/VCR if you want the TV/VCR to start
tape playback at the specified time.
1
Press SLEEP/WAKE UP until WAKE UP
TIMER appears. Press F.FWD/B or REW/s
until [ON] appears.
WAKE UP B ON/OFF
TIMER
TV/TAPE [TV]
TIME
2
Press PLAY/
Press F.FWD/B or REW/s to select [TV] or
[TAPE]. If you select TV, the current TV channel
will be on when the TV/VCR turns on. Select TAPE
to start tape playback when the TV/VCR turns on.
WAKE UP
ON/OFF
TIMER
B TV/TAPE [TV]
TIME
3
Press PLAY/
Press F.FWD/B or REW/s to select your
desired wake up time.
Each button press will increase (or decrease) the
time by 10 minutes.
WAKE UP
ON/OFF
TIMER
TV/TAPE [TV]
B TIME
4
Press MENU to remove the menu, then press
POWER to turn off the TV/VCR. The TV/VCR
will turn on at the specified time.
Page 40
[ON]
[12:OOAM]
or STOP/ to select TV/TAPE.
[ON]
[12:OOAM]
or STOP/
to select TIME.
[ON]
[12:OOAM]
1-3
POWER
SLEEP/WAKE UP
PLAY
REW
F.FWD
STOP
DISPLAY
1
2
3
4
5
6
7
8
9
4
0
+ 100
SPEED
RESET
PAUSE/STILL
TIME SEARCH
MUTE
RECORD
Helpful Hint
• To cancel the Wake Up Timer,
press SLEEP/WAKE UP until
WAKE UP TIMER appears, then
press F.FWD/B or REW/s until
[OFF] appears.
4
1
CH.
VOL.
Advertisement
Table of Contents
