Table of Contents
Advertisement
MC13D1MG
3/22/02
1:26 PM
D
Hooking Up Your TV/VCR to Another Video Source (VCR or Camcorder)
You may need this connection if you want to copy tapes or view tapes that you are playing on the
VCR or camcorder. Select channel 00 (AUX) at the TV/VCR when viewing tapes that are playing on
the VCR or camcorder. Details are on page 30.
AUDIO/VIDEO OUT
Jacks on VCR
3CH
IN
4CH
AUDIO
VIDEO
OUT
ANT.
OUT
IN
2
When all other connections are complete, plug in the TV/VCR's power
cord.
3
Before you turn on the TV/VCR, go to page eight.
• Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is
bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.
• Audio and video cables are not supplied.
Crooked Pin
Cable
Page 7
Connect an Audio cable to the AUDIO
OUT Jack on the VCR and to the AUDIO In
Jack on the front of the TV/VCR.
3CH
IN
4CH
AUDIO
VIDEO
ANT.
OUT
OUT
IN
Connect a Video cable to the VIDEO OUT Jack on the
VCR and to the VIDEO In Jack on the front of the TV/VCR.
Helpful Hints
Bent pin
Plug
Hooking Up the TV/VCR (cont'd) 7
VIDEO AUDIO
Straight Pin
VIDEO
AUDIO
EARPHONE
POWER
VOLUME
CHANNEL
STOP/EJECT
REW
PLAY
F.FWD
REC/OTR
AUDIO/VIDEO In Jacks
on front of TV/VCR
Advertisement
Table of Contents
