On-Screen Status Displays - Magnavox CC19B1MG Owner's Manual

26 On-Screen Status Displays

A status display will appear when you press the STATUS/EXIT but-
ton or certain function buttons. The contents of the status display
will vary. To choose the status display mode, follow the steps below.
If you select STATUS ON, then select COUNTER ONLY
OFF:
Whenever you press the STOP/p button or the PLAY/o button,
the status display will appear for five seconds. Portions of the sta-
tus display also may appear when you press other function but-
tons.
If you select STATUS ON, then select COUNTER ONLY
ON:
Whenever you press the PLAY/o button, the status display will
appear for five seconds. After five seconds, only the counter will
remain on the screen. Portions of the status display also may
appear when you press other function buttons.
If you select STATUS OFF:
The status display will not appear when you press function but-
tons. You must press the STATUS/EXIT button to see the status
display.
1
Press the MENU button.
2
Press the PLAY/ button or the STOP/
VCR SETUP, then press the FF/SEARCH/B button.
3
Press the PLAY/ button or the STOP/
ON-SCREEN MODE, then press the FF/SEARCH/B button.
4
Press the PLAY/o button or the STOP/p button to select
STATUS, then press the FF/SEARCH/B button so that
ON or OFF appears beside STATUS.
ON-SCREEN MODE
STATUS [ON]
>
COUNTER ONLY [OFF]
SELECT KL CHOOSE B
TO END PRESS EXIT
5
If you set STATUS to OFF, go to step 6.
If you set STATUS to ON, press the PLAY/o button or
the STOP/p button to select COUNTER ONLY, then
press the FF/SEARCH/B button so that ON or OFF
appears beside it.
6
Press the STATUS/EXIT button.
button to select
button to select
Channel
Time
12:00 AM
CH10
SLP M 1:23:45
Counter
Tape
and
Speed
Counter
Memory
Helpful Hint
• You cannot view closed captions
during recording or tape playback if
COUNTER ONLY is set to ON.
Details are on pages 48-49.
• If STATUS is set to ON, closed cap-
tions will be interrupted briefly when
you insert or remove a tape. Details
are on page 48-49.
Current
Tape
Function
STOP